Will It fit?????
| auszookers.com https://auszookers.com/forum/ |
|
| 1.6 efi into sierra https://auszookers.com/forum/viewtopic.php?f=5&t=13181 |
Page 1 of 1 |
| Author: | jim_dover [ Wed Jun 30, 2010 8:02 am ] |
| Post subject: | 1.6 efi into sierra |
Hi everyone, I have a 1.6 efi vitara motor in my holden drover and am in need of a new throttle cable as my carbie on so about 6 inches to short. This is a common problem I'm taking it?? What can I do or where can I get one made?? Cheers Nick |
|
| Author: | Gwagensteve [ Wed Jun 30, 2010 8:08 am ] |
| Post subject: | Re: 1.6 efi into sierra |
Why not use the EFI vitara one? Steve. |
|
| Author: | jim_dover [ Wed Jun 30, 2010 8:18 am ] |
| Post subject: | Re: 1.6 efi into sierra |
Will It fit?????
|
|
| Author: | Gwagensteve [ Wed Jun 30, 2010 8:24 am ] |
| Post subject: | Re: 1.6 efi into sierra |
Might need to mod the accelerator, (can't recall) but the firewall hole is the same and at least you'll know it will fit the manifold. Just have a wrecker scrounge. Swift would probably also work and Baleno definitely will, but most of these cars use a ball and socket connector on the pedal (which is superior to the sierra set up) I've moded a bunch of pedals to work with 660 sierra, Baleno, cappuccino, vitara etc accelerator cables. Pedals don't break but cables do - you don't want a custom cable. Steve. |
|
| Author: | want33s [ Wed Jun 30, 2010 8:42 am ] |
| Post subject: | Re: 1.6 efi into sierra |
jim_dover wrote: Will It fit?????
Yep EFI Vit cable fits fine. It won't go into the pedal arm like a Sierra cable will but if you sit it in the Y and put a bolt through it'll be fine. |
|
| Author: | jim_dover [ Sat Jul 03, 2010 6:02 am ] |
| Post subject: | Re: 1.6 efi into sierra |
All great news I was really avoiding getting a custom cable made 
Thanks for the in put fellas. Probably go down to the wreckers this week some time.. Cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|