| auszookers.com https://auszookers.com/forum/ |
|
| need wiring help g16b to sierra https://auszookers.com/forum/viewtopic.php?f=5&t=13283 |
Page 1 of 1 |
| Author: | bazook [ Sun Jul 04, 2010 1:21 pm ] |
| Post subject: | need wiring help g16b to sierra |
i've been staring at the car for to long now trying work the wiring out so is any one confident enough to do it for me i have all the wiring harness and relays, ecu. The g16b im using is the motor that has the coil inside the distributor and a mitsubishi computer (which i need one if anyone has one)running the motor please help to put another lwb on the road  
|
|
| Author: | Damo [ Sun Jul 04, 2010 11:53 pm ] |
| Post subject: | Re: need wiring help g16b to sierra |
bazook wrote: i've been staring at the car for to long now trying work the wiring out so is any one confident enough to do it for me i have all the wiring harness and relays, ecu. The g16b im using is the motor that has the coil inside the distributor and a mitsubishi computer (which i need one if anyone has one)running the motor
please help to put another lwb on the road Sounds like and x90 engine. I have one in my Sierra, and as far as I can tell the wiring is slightly different to Vit 16v engines. Why do you need a ECU??? |
|
| Author: | want33s [ Mon Jul 05, 2010 12:33 am ] |
| Post subject: | Re: need wiring help g16b to sierra |
You say you have the ECU but then you say you need the computer?????????????? ECU IS the computer.... Try Killalux..... http://stores.ebay.com.au/id=96583767 |
|
| Author: | bazook [ Mon Jul 05, 2010 1:36 am ] |
| Post subject: | Re: need wiring help g16b to sierra |
i have the ecu but the plug isnt the best so i,ve had to wire it direct to circuit board ill give killer lux a go |
|
| Author: | Damo [ Mon Jul 05, 2010 1:43 am ] |
| Post subject: | Re: need wiring help g16b to sierra |
bazook wrote: i have the ecu but the plug isnt the best so i,ve had to wire it direct to circuit board ill give killer lux a go
pics? What model is the ECU? Will have a number on it like this: 
|
|
| Author: | bazook [ Mon Jul 05, 2010 2:56 am ] |
| Post subject: | Re: need wiring help g16b to sierra |
|
|
| Author: | Damo [ Mon Jul 05, 2010 3:10 am ] |
| Post subject: | Re: need wiring help g16b to sierra |
Your connectors look ok in that pic??? |
|
| Author: | bazook [ Mon Jul 05, 2010 3:09 pm ] |
| Post subject: | Re: need wiring help g16b to sierra |
its where the yellow wire is solded the pins that go to the circuit board are corroded and have came off the board |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|