you will either need to hit it hard and itl come out. or use a puller! may as well buy one now ul use it heaps as a mechanic
| auszookers.com https://auszookers.com/forum/ |
|
| steering issues https://auszookers.com/forum/viewtopic.php?f=5&t=13349 |
Page 1 of 1 |
| Author: | zuk85 [ Wed Jul 07, 2010 1:09 am ] |
| Post subject: | steering issues |
for a while now i have had wandering issues with my sierra's steering and now its off the road, im going to fix a few issues the joint from the pitman arm to the drag-rod is fu*ked so sloppy and loose. Now I have undone the top nut and removed the split pin and the prick wont come out. says in my manual i need a two-jaw puller to remove the joint. now my other problem is do i have to remove the whole drag rod and what eva and have new joint put in " do they need to be pressed or anything" or is it simple push out and put in new one. also where do i get new joint from. cheers Josh |
|
| Author: | lump_a_charcoal [ Wed Jul 07, 2010 1:21 am ] |
| Post subject: | Re: steering issues |
Don't the new ball ends just screw in? |
|
| Author: | zuk85 [ Wed Jul 07, 2010 1:29 am ] |
| Post subject: | Re: steering issues |
sorry i think your thinking of the tie-rod end that screws in, the drag rod connects off of that and goes up to the pitman arm which is connected to the steering gear/ box around where the steering damper is. i can see i need to press the bolt comming up through the pitman arm but then what do i do to replace the stuffed bushing/joint ??????????????????????? |
|
| Author: | lump_a_charcoal [ Wed Jul 07, 2010 1:35 am ] |
| Post subject: | Re: steering issues |
Um can you take a pic? So the pitman arm is flogged out? |
|
| Author: | zuk85 [ Wed Jul 07, 2010 1:47 am ] |
| Post subject: | Re: steering issues |
unfortunatly the mrs has gone to work and always has the camera in her bag :S:S:S yea the pitman arm joint to the drag-rod if flogged alright. i need to get these jaw-puller things cause i cant pull the drag-rod off the knuckles to get to the joint/bolts to replace them |
|
| Author: | lump_a_charcoal [ Wed Jul 07, 2010 1:51 am ] |
| Post subject: | Re: steering issues |
Sounds like you need a new pitman arm then, I think it is just a tapered hole, don't think there is a bush in there. |
|
| Author: | want33s [ Wed Jul 07, 2010 4:16 am ] |
| Post subject: | Re: steering issues |
You be around tomorrow Josh? I'll drop by and show you how to remove it. |
|
| Author: | zuk85 [ Wed Jul 07, 2010 4:25 am ] |
| Post subject: | Re: steering issues |
yep i'll be around till the 26th of this month till i start my auto mechanics tafe course lol. oh oh oh on that note i wont be round 2moro untill about 11am have to look for some work placement for my tafe need a mechanis business too take me on for 1-2 days a week have to build up 200hrs during my course so come on any places out there lol. |
|
| Author: | slowsierra [ Wed Jul 07, 2010 4:29 am ] |
| Post subject: | Re: steering issues |
take out the split pin and loosen the nut but leave it on a few turns hit the side of the pit arm right where the bolt goes through might take a few goes but it should drop out because it is tapered. just did it to my car the other day. |
|
| Author: | zuk85 [ Wed Jul 07, 2010 5:13 am ] |
| Post subject: | Re: steering issues |
ive wd-40'd it all, and i will keep on the slight taps to see if it comes off will let ya know how it pans out. |
|
| Author: | Gwagensteve [ Wed Jul 07, 2010 6:20 am ] |
| Post subject: | Re: steering issues |
I'm pretty sure the ball joint is integral into the drag link - they certainly don't unscrew. Steve. |
|
| Author: | alien [ Wed Jul 07, 2010 6:54 am ] |
| Post subject: | Re: steering issues |
maybe you can "upgrade" - a few places make crmo replacement steering linkages, then its just a case of unbolting the lot and throwing on the new one. Don't forget if you touch the tie-rod you're going to throw out the wheel alignment. |
|
| Author: | zuk85 [ Wed Jul 07, 2010 7:07 am ] |
| Post subject: | Re: steering issues |
all good im not touching the tie-rod im touching the drag-rod its the first bar after the steering box. wants 33's has upgraded his by welding a steel sleeve around it i have seen in his pics. im keen to do that whiles its off " well when i get it off still cant get it off its held on there good it just wont slide off over the bolts, and yes i have undone the split pin and nut lol " |
|
| Author: | alien [ Wed Jul 07, 2010 8:14 am ] |
| Post subject: | Re: steering issues |
i remember when we took mine off years ago it needed some heat (oxy) and a hammer... don't forget its been in there for around 20 years =) its happy to stay put... lol |
|
| Author: | BJPK [ Wed Jul 07, 2010 9:02 am ] |
| Post subject: | Re: steering issues |
you will either need to hit it hard and itl come out. or use a puller! may as well buy one now ul use it heaps as a mechanic
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|