auszookers.com
https://auszookers.com/forum/

Fixing panel gaps around the flares
https://auszookers.com/forum/viewtopic.php?f=5&t=13458		 Page 1 of 1
Author:  Che [ Sat Jul 10, 2010 11:47 pm ]
Post subject:  Fixing panel gaps around the flares
My zook must have had a hell of a life at the hands of the previous owner, it's been job after job just to get it looking like a tidy stocker again.

One of the last jobs before I start priming up panels is to fix the gaps around the flare guards - not one flare on my car is a snug fit with the wheel arch, they've all got 1 - 2mm gaps somewhere along the welting.

Image

Image

Image

Image


I think it'd be silly to respray and not fix these gaps up, but not sure if i'm biting off more than I can chew. I'm yet to pull the guards off and see how they attach to the wheel arch... maybe I can do that later this arvo.

Rather than new welting can I caulk up these gaps?


Also - i've been told left front / right rear guards are the same, so too right front / left rear. Has anyone ever put them on the wrong guard? Just wondering if that's what's causing this gap, as there's no obvious panel damage causing it

Image
Author:  31zook [ Sat Jul 10, 2010 11:52 pm ]
Post subject:  Re: Fixing panel gaps around the flares
don't worry about it, it's a sierra, and every sierra has gaps from factory.... most come with optional panel gaps, they call it rust...
Author:  eldo [ Sun Jul 11, 2010 12:22 am ]
Post subject:  Re: Fixing panel gaps around the flares
You could try lossening the bolts and pushing the flare then re tensioning it. If your painting green you won want those flare rubbers anyway as they are white rubber
Author:  Che [ Sun Jul 11, 2010 12:44 am ]
Post subject:  Re: Fixing panel gaps around the flares
I'm thinking of using sikaflex instead of the flare rubbers / welting - this'd do the job, wouldn't it?
Author:  alex [ Sun Jul 11, 2010 12:46 am ]
Post subject:  Re: Fixing panel gaps around the flares
Buy these problem solved
http://www.doubleblackoffroad.com/main.php


have a look half way down
http://www.auszookers.com/index.php?nam ... &start=210
Author:  Che [ Sun Jul 11, 2010 12:50 am ]
Post subject:  Re: Fixing panel gaps around the flares
Sweet - but just a little more $$$ than I got to spend (damn, they'd be perfect though). How long did it take to put them on?


Nice build up BTW Alex, looks like a fun project
Author:  alex [ Sun Jul 11, 2010 1:01 am ]
Post subject:  Re: Fixing panel gaps around the flares
che_guitarra wrote:
Sweet - but just a little more $$$ than I got to spend (damn, they'd be perfect though). How long did it take to put them on?


Nice build up BTW Alex, looks like a fun project



about an hour arfter the flairs are off :)

thanks mate 8) :D
Author:  ajsr [ Sun Jul 11, 2010 1:30 am ]
Post subject:  Re: Fixing panel gaps around the flares
you really want to paint the car with the frares off the vehicle as the paint will bridge other wise and flake around there later.
the other reason is that you get to clean under the flare and reseal and color that area with new paint.
the wadding/fill strip is not supposed to be painted as its the flexable component of the joint it will always crack and peal eventually if painted.
I would not sika the flare gaps as it will cause you other problems later if you bash or want to remove the flare.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/