| auszookers.com https://auszookers.com/forum/ |
|
| Trailer attachment, but wiring snipped https://auszookers.com/forum/viewtopic.php?f=5&t=13459 |
Page 1 of 1 |
| Author: | Che [ Sun Jul 11, 2010 12:10 am ] |
| Post subject: | Trailer attachment, but wiring snipped |
Another photo I got this trailer wiring point (for lack of a better name), but all the wiring has been snipped off just behind it.
Might as well try and get this fixed too, anyone know how to graft it back into the main loom?
|
|
| Author: | 89_tintop [ Sun Jul 11, 2010 12:12 am ] |
| Post subject: | Re: Trailer attachment, but wiring snipped |
I camrewire it for Gounod you wantto make the trip to the gold coast ... They aren't that hard to rewire mate ... But if you buy a new plug ( which o would) they tell you how to wire it up.. What colour goes to what pin. |
|
| Author: | 89_tintop [ Sun Jul 11, 2010 12:26 am ] |
| Post subject: | Re: Trailer attachment, but wiring snipped |
Pin 1 - yellow - left indicator pin 2 - blue - aux/brakes pin 3 - white - earth pin 4 - green - right indicator pin 5 - black - reverse pin 6 - red - brake pin 7 - brown - tail light That is the code for them mate .. If you take the centre piece out there should be very small numbers next to where the wire goes in ... Have fun and good luck |
|
| Author: | Che [ Sun Jul 11, 2010 12:32 am ] |
| Post subject: | Re: Trailer attachment, but wiring snipped |
I'm pretty handy with rewiring things, so hopefully this is just a doddle. Cheers for the info mate |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|