| auszookers.com https://auszookers.com/forum/ |
|
| cracked windscreen frame https://auszookers.com/forum/viewtopic.php?f=5&t=13468 |
Page 1 of 1 |
| Author: | honks [ Sun Jul 11, 2010 8:05 am ] |
| Post subject: | cracked windscreen frame |
my 95 sierra has a small crack in the windscreen frame just near the washer sprayer thing just wondering if there is any way of covering this up/bracing over the top of it with out welding & re-painting it the crack is about 20mm long |
|
| Author: | stockman [ Sun Jul 11, 2010 8:17 am ] |
| Post subject: | Re: cracked windscreen frame |
Is it near the jet or near the wiper arm? |
|
| Author: | reallyuted [ Sun Jul 11, 2010 8:18 am ] |
| Post subject: | Re: cracked windscreen frame |
get a small drill bit and drill out the ends of the crack that should stop it getting any bigger and fit some ally checker plate over it |
|
| Author: | squirezook [ Sun Jul 11, 2010 8:19 am ] |
| Post subject: | Re: cracked windscreen frame |
honks I found that the metal is as thin as. I pulled out the frame and welded it up. Very thin, weld grind, weld grind, weld grind...The crack is from the panel flexing when the wipers are on. Check the wiper pole and stick some lube on it . Mine was a bit rusted and seized. You may be able to cut some alloy plate and drill a hole the size of the pole and stick it on with sika flex. A piece right across the front might look ok 
|
|
| Author: | honks [ Sun Jul 11, 2010 8:52 am ] |
| Post subject: | Re: cracked windscreen frame |
crack is near the jet might put some plate over it or something like that just don't want to leave it to long and get it full of rust |
|
| Author: | zooky08 [ Sun Jul 11, 2010 9:01 am ] |
| Post subject: | Re: cracked windscreen frame |
when putting the plate on try not to put any weight onto the frame exspecially the corner were the wipers are. the bottom panel is very weak and doesnt take much to make it flex. ive craked two (2) windscreen from putting little bit of weight to the fram and playing with the wipers, not very happy that i got to go out and get a third windscreen |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|