| auszookers.com https://auszookers.com/forum/ |
|
| Jimny gearbox to sierra https://auszookers.com/forum/viewtopic.php?f=5&t=13515 |
Page 1 of 1 |
| Author: | Darren [ Tue Jul 13, 2010 8:21 am ] |
| Post subject: | Jimny gearbox to sierra |
I just converted a jimny gearbox to suit a sierra ,to do this you need to swap the selectors from a sierra box, the jimny gearbox has a circlip on the back of the 5th speed cog which the sierra doesn't have   I machined the sierra housing to suit and good to go 
|
|
| Author: | Rusho [ Tue Jul 13, 2010 8:26 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
Good work mate. Excuse my ignorance, but why? Is there any advantages? |
|
| Author: | gman [ Tue Jul 13, 2010 8:50 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
thats awesome!! does this open up Sierra's to m13a, m15a, m18a conversions? If you use a later model jimny box? |
|
| Author: | Rusho [ Tue Jul 13, 2010 8:52 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
It starts to make sense now 
|
|
| Author: | Darren [ Tue Jul 13, 2010 9:55 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
I'm putting an M15 into a sierra |
|
| Author: | Highway-Star [ Tue Jul 13, 2010 10:00 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
Cool! Do you have pictures of the original Jimny selector housing for a point of comparison? |
|
| Author: | Darren [ Sun Jul 18, 2010 7:38 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
Jimny rear housing 
|
|
| Author: | steak_knife [ Sun Jul 18, 2010 7:57 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
Snap-on screwdriver...  
|
|
| Author: | Highway-Star [ Sun Jul 18, 2010 8:03 am ] |
| Post subject: | Re: Jimny gearbox to sierra |
Darren wrote: Jimny rear housing
Cheers for that! I've never seen a good picture of one before. Was wondering if using a Jimny rear housing on a Sierra gearbox might yield a better shifter position for use in an LJ (as compared to just whacking a Sierra 5 speed in one). Looks as if it might be OK  
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|