auszookers.com
https://auszookers.com/forum/

1.6 Sump????
https://auszookers.com/forum/viewtopic.php?f=5&t=13604
Page 1 of 1

Author:  bigrig91 [ Sat Jul 17, 2010 6:41 am ]
Post subject:  1.6 Sump????

Hey boys, i have this sump on my sierra with a 1.6 carby conversion in it, it looks like a 1.3 sump modified to fit.....My question is, is it?? Can i put a 1.6 sump in??? Who has a 1.6 sump and how much do they want????

THanks in advance.

Brad

Author:  BlueSuzy [ Sat Jul 17, 2010 7:10 am ]
Post subject:  Re: 1.6 Sump????

vit/x90/baleno sumps are different.

Why change if its ok now?

Very confusing to read on what your wanting..e.g. pictures also?

Author:  lukes_89 [ Sat Jul 17, 2010 9:47 am ]
Post subject:  Re: 1.6 Sump????

if you put the 1.6 sump on, it will not mold around the diff properly, so at full flex or anything alike your diff may smash through the sump. also if a 1.3 has been modded to fit then that would mean they have modded the 1.3 pick up to fit as well, so if you changed to a 1.6 sump you will need a sump and new pick up. id strongly recommend leaving the 1.3 sump on. is their a reason you want the 1.6 one on their at all?

Author:  Fatzook [ Sat Jul 17, 2010 10:58 am ]
Post subject:  Re: 1.6 Sump????

I have 1.6 sump in my sierra. Its fine. But I have RUF aswell. It did used to fit before the RUF, but it was VERY close to the diff at full stuff.

Author:  steak_knife [ Sat Jul 17, 2010 3:16 pm ]
Post subject:  Re: 1.6 Sump????

BlueSuzy wrote:
vit/x90/baleno sumps are different.

Why change if its ok now?

Very confusing to read on what your wanting..e.g. pictures also?


X2, what's wrong with the one pictured???

1.6 sump's fit, but I'm told thay run low on oil on steep hill's & get munched by the front diff.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/