| auszookers.com https://auszookers.com/forum/ |
|
| Carby Base Gaskets https://auszookers.com/forum/viewtopic.php?f=5&t=13669 |
Page 1 of 1 |
| Author: | mtooka [ Tue Jul 20, 2010 1:47 am ] |
| Post subject: | Carby Base Gaskets |
Guys, Can anyone help me help the nuffies at Ripco with the Part numbers for the Sierra 1.3 Carby Base mounting gaskets. Above and below the small alloy block? Even better, anyone know where I can get a set from from anyone on here? Cheers Matt |
|
| Author: | Lokidog [ Tue Jul 20, 2010 5:26 am ] |
| Post subject: | Re: Carby Base Gaskets |
The gaskets are normally part of the carby rebuild kits. You could try a carby specialist? I cut my own gasket for my 1.3 carby a couple of years ago. Not hard, you just have to be patient. |
|
| Author: | steak_knife [ Tue Jul 20, 2010 6:09 am ] |
| Post subject: | Re: Carby Base Gaskets |
Lokidog wrote: The gaskets are normally part of the carby rebuild kits.
You could try a carby specialist? I cut my own gasket for my 1.3 carby a couple of years ago. Not hard, you just have to be patient. I've cut em out of corn flake's box's.... 
|
|
| Author: | Westie [ Tue Jul 20, 2010 9:20 am ] |
| Post subject: | Re: Carby Base Gaskets |
steknig you DA MAN I thought I was the only one left on the planet that did that stuff. |
|
| Author: | atari4x4 [ Tue Jul 20, 2010 9:48 am ] |
| Post subject: | Re: Carby Base Gaskets |
haha, the weet-bix gaskets are priceless... whats even funnier is pulling a cheap chinese air compressor apart to find they have used a cardboard coke caton... 
|
|
| Author: | Westie [ Tue Jul 20, 2010 10:22 am ] |
| Post subject: | Re: Carby Base Gaskets |
Shear quality the cheap one's have Pepsi |
|
| Author: | steak_knife [ Tue Jul 20, 2010 10:56 am ] |
| Post subject: | Re: Carby Base Gaskets |
Westie wrote: steknig you DA MAN I thought I was the only one left on the planet that did that stuff.
Have to do what you have to do.. Used to assemble Vw eng's with just aviation goo.. 
Buggger's still leaked!!! 
|
|
| Author: | ZookiMonsta [ Tue Jul 20, 2010 11:28 am ] |
| Post subject: | Re: Carby Base Gaskets |
Go see your local suzi shop, someone like suzi auto or suzi sport or whatever they call em down your way, I bought 4 off the shelf for something like $4.40 each, couldn't tell ya the part numbers till the morning though. |
|
| Author: | Lokidog [ Tue Jul 20, 2010 11:07 pm ] |
| Post subject: | Re: Carby Base Gaskets |
atari4x4 wrote: haha, the weet-bix gaskets are priceless...
whats even funnier is pulling a cheap chinese air compressor apart to find they have used a cardboard coke caton... Now that's recycling! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|