auszookers.com
https://auszookers.com/forum/

Hand throttle
https://auszookers.com/forum/viewtopic.php?f=5&t=13909		 Page 1 of 1
Author:  buzbox [ Thu Jul 29, 2010 1:06 am ]
Post subject:  Hand throttle
I'm just wondering, Is it possible to setup a hand throttle by using a universal choke cable? Would it be connected to the throttle body or just off the pedal?
Author:  BlueSuzy [ Thu Jul 29, 2010 1:11 am ]
Post subject:  Re: Hand throttle
Yes it is possible. I have seem some pics of bike gearlevers/brakelevers also on the gearstick. I would connect it to the throttle body.
Author:  shep [ Thu Jul 29, 2010 1:19 am ]
Post subject:  Re: Hand throttle
i reckon setting up the idle up solenoid on a switch would be the easiest way to go.
set it at around 2000rpm or so and just flick a switch.
Author:  Highway-Star [ Thu Jul 29, 2010 1:49 am ]
Post subject:  Re: Hand throttle
buzbox wrote:
I'm just wondering, Is it possible to setup a hand throttle by using a universal choke cable? Would it be connected to the throttle body or just off the pedal?



I have been thinking of doing this for a while to my Sierra, as the G16 is very touchy on the accelerator compared to the old G13 or F10.
Was looking at copying the choke on my fathers Diesel Hilux, has a sort of screw knob that uses a cable that simply moves the pedal.
Author:  BlueSuzy [ Thu Jul 29, 2010 2:02 am ]
Post subject:  Re: Hand throttle
Highway-Star wrote:
buzbox wrote:
I'm just wondering, Is it possible to setup a hand throttle by using a universal choke cable? Would it be connected to the throttle body or just off the pedal?



I have been thinking of doing this for a while to my Sierra, as the G16 is very touchy on the accelerator compared to the old G13 or F10.
Was looking at copying the choke on my fathers Diesel Hilux, has a sort of screw knob that uses a cable that simply moves the pedal.


You get used to the touchy response.
Author:  Ben_Sierra [ Thu Jul 29, 2010 2:12 am ]
Post subject:  Re: Hand throttle
shep wrote:
i reckon setting up the idle up solenoid on a switch would be the easiest way to go.
set it at around 2000rpm or so and just flick a switch.


I reckon that is a brilliant idea....
Author:  Highway-Star [ Thu Jul 29, 2010 3:23 am ]
Post subject:  Re: Hand throttle
BlueSuzy wrote:
Highway-Star wrote:
buzbox wrote:
I'm just wondering, Is it possible to setup a hand throttle by using a universal choke cable? Would it be connected to the throttle body or just off the pedal?



I have been thinking of doing this for a while to my Sierra, as the G16 is very touchy on the accelerator compared to the old G13 or F10.
Was looking at copying the choke on my fathers Diesel Hilux, has a sort of screw knob that uses a cable that simply moves the pedal.


You get used to the touchy response.



Your right. I am allot more used to it now. Hence its one of those things I've put off, and put off, and put off.....etc etc :lol:
one day :roll:


No idle up solenoid on EFI motors :wink:
Author:  tanshi [ Thu Jul 29, 2010 3:24 am ]
Post subject:  Re: Hand throttle
im thinking the 50 might get a hand throttle too.
Author:  JrZook [ Thu Jul 29, 2010 3:58 am ]
Post subject:  Re: Hand throttle
Highway-Star wrote:
BlueSuzy wrote:
Highway-Star wrote:
buzbox wrote:
I'm just wondering, Is it possible to setup a hand throttle by using a universal choke cable? Would it be connected to the throttle body or just off the pedal?



I have been thinking of doing this for a while to my Sierra, as the G16 is very touchy on the accelerator compared to the old G13 or F10.
Was looking at copying the choke on my fathers Diesel Hilux, has a sort of screw knob that uses a cable that simply moves the pedal.


You get used to the touchy response.



Your right. I am allot more used to it now. Hence its one of those things I've put off, and put off, and put off.....etc etc :lol:
one day :roll:


No idle up solenoid on EFI motors :wink:


You connected up the electrical load pins from your ecu (goes to light, fan, AC circuits etc). Not much increase but can bring mine upto 1200rpm.

Dan
Author:  jdk81 [ Thu Jul 29, 2010 7:46 am ]
Post subject:  Re: Hand throttle
shep wrote:
i reckon setting up the idle up solenoid on a switch would be the easiest way to go.
set it at around 2000rpm or so and just flick a switch.


And the switch is already wired up.
(heater or parkers)
Author:  Brett [ Thu Jul 29, 2010 8:28 am ]
Post subject:  Re: Hand throttle
do it to the pedal near the fire wall. if you use a bike gear leaver that locks you not have cruise control :D
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/