| auszookers.com https://auszookers.com/forum/ |
|
| SJ80 workshop manual https://auszookers.com/forum/viewtopic.php?f=5&t=13928 |
Page 1 of 1 |
| Author: | Pitto [ Thu Jul 29, 2010 9:46 am ] |
| Post subject: | SJ80 workshop manual |
Hey guys, Looking for a SJ80 manual (download), just got a coily and it is blowing oil out of, what I believe to be the "EGR VALVE". Just need to have a look at a manual or are there any links to a microfishe (exploded view of the 1.3 engine)? Or any ideas as to what the prob is? |
|
| Author: | Rusho [ Thu Jul 29, 2010 10:36 am ] |
| Post subject: | Re: SJ80 workshop manual |
There isn't one as far as I know. Put up a pic of your problem. The guru's will help you out |
|
| Author: | Rusho [ Thu Jul 29, 2010 10:36 am ] |
| Post subject: | Re: SJ80 workshop manual |
......welcome to AZ also |
|
| Author: | paulv [ Tue Aug 10, 2010 3:12 pm ] |
| Post subject: | Re: SJ80 workshop manual |
EGR - Exhaust Gas Recirculation valve? You sure about that is where the oil is coming from? |
|
| Author: | unique_seek [ Wed Aug 11, 2010 7:57 am ] |
| Post subject: | Re: SJ80 workshop manual |
as far as I know there is no manual,but I do believe that some of the early swif/barinas have the same g13ba |
|
| Author: | Pitto [ Sun Aug 15, 2010 2:56 am ] |
| Post subject: | Re: SJ80 workshop manual |
Thanks for the replies, got it sorted, after having a better look found it was coming from the fuel pump tell tale and spewing oil everywhere. New fuel pump and all good! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|