One of these things
| auszookers.com https://auszookers.com/forum/ |
|
| how do i get my factory tacho working again https://auszookers.com/forum/viewtopic.php?f=5&t=13929 |
Page 1 of 1 |
| Author: | sierra_666 [ Thu Jul 29, 2010 9:59 am ] |
| Post subject: | how do i get my factory tacho working again |
i have no idea how or where to even start looking for the reason my tacho isn't working is there anyone with a n/t swb that could help with my little dilemma |
|
| Author: | Bruce [ Thu Jul 29, 2010 10:11 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
Check that the wire has not come off the coil. I am sure it gets it power from there? |
|
| Author: | sierra_666 [ Thu Jul 29, 2010 10:26 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
coil being? |
|
| Author: | Bruce [ Thu Jul 29, 2010 10:33 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
|
One of these things |
|
| Author: | 89_tintop [ Thu Jul 29, 2010 10:35 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
Ignition coil mate.... Bolted to the firewall right behind the motor |
|
| Author: | SuziBlu [ Thu Jul 29, 2010 11:10 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
Sadly, if you do not know what the coil is, take it to an auto electrician. This will be a far easier solution. Bruce, the pic shows a coil that needs an external resistor, not for a suzi, 1.3l onwards. |
|
| Author: | sierra_666 [ Thu Jul 29, 2010 11:11 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
i new that coil i just wasn't aware that the tacho was supposed to be attached to it |
|
| Author: | Ben_Sierra [ Thu Jul 29, 2010 11:47 am ] |
| Post subject: | Re: how do i get my factory tacho working again |
The tacho knows the revs by how many times the coil pulses. Get a manual with a decent wiring diagram and it'll help you out with all these niggly little electrical issues... |
|
| Author: | sierra_666 [ Thu Jul 29, 2010 12:07 pm ] |
| Post subject: | Re: how do i get my factory tacho working again |
got one now all i have to do is use it,lol |
|
| Author: | Bruce [ Thu Jul 29, 2010 7:45 pm ] |
| Post subject: | Re: how do i get my factory tacho working again |
SuziBlu wrote: Sadly, if you do not know what the coil is, take it to an auto electrician.
This will be a far easier solution. Bruce, the pic shows a coil that needs an external resistor, not for a suzi, 1.3l onwards. I just grabbed the first coil that i seen on the web and posted it. Just to show him what it was 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|