| auszookers.com https://auszookers.com/forum/ |
|
| diff whigne? https://auszookers.com/forum/viewtopic.php?f=5&t=14012 |
Page 1 of 1 |
| Author: | sierra_666 [ Mon Aug 02, 2010 5:20 am ] |
| Post subject: | diff whigne? |
i had a whinge coming from what i thought was the rear diff, i changed diffs and the whinge is still there. What could be causing this noise? it only really starts when i hit about 80kms and stop s when i back off. |
|
| Author: | tanshi [ Mon Aug 02, 2010 5:29 am ] |
| Post subject: | Re: diff whigne? |
could be wheel bearing |
|
| Author: | weaves [ Mon Aug 02, 2010 5:48 am ] |
| Post subject: | Re: diff whigne? |
what did the rear bearings look like when you removed the axles? ball bearings often make a whine when they are on there way out. |
|
| Author: | TZAR [ Mon Aug 02, 2010 5:59 am ] |
| Post subject: | Re: diff whigne? |
punch your wife...... that should stop the whingeing |
|
| Author: | SuziBlu [ Mon Aug 02, 2010 6:01 am ] |
| Post subject: | Re: diff whigne? |
TZAR wrote: punch your wife...... that should stop the whingeing
Or increase it 10 fold lol |
|
| Author: | matfan [ Mon Aug 02, 2010 8:13 pm ] |
| Post subject: | Re: diff whigne? |
The noise may not be the diff. Have you had the car on a hoist (or stands) to hear the noise from the source. Quite often noises from the transfer/gearbox can sound like they're coming from the back. When mine did that it turned out to be the hard casing on the pinion shaft. |
|
| Author: | sierra_666 [ Mon Aug 02, 2010 11:38 pm ] |
| Post subject: | Re: diff whigne? |
yeah wheels bearings where my next guess but they didn't look to bad when i pulled axels out, |
|
| Author: | BlueSuzy [ Tue Aug 03, 2010 12:06 am ] |
| Post subject: | Re: diff whigne? |
Mine was vibrating whining like a bitch. Turned out to be the rear uni on ther tailshaft. She was seized.. |
|
| Author: | sierra_666 [ Tue Aug 03, 2010 2:36 am ] |
| Post subject: | Re: diff whigne? |
so best bet would be to take it to a mechanic then i suppose |
|
| Author: | tanshi [ Tue Aug 03, 2010 2:41 am ] |
| Post subject: | Re: diff whigne? |
if your not able to do bearings your self, yes |
|
| Author: | sierra_666 [ Fri Aug 06, 2010 10:35 am ] |
| Post subject: | Re: diff whigne? |
the transfer case looks like its been leaking oil might that be part of the problem? should i check fluid? |
|
| Author: | steak_knife [ Fri Aug 06, 2010 11:10 am ] |
| Post subject: | Re: diff whigne? |
sierra_666 wrote: the transfer case looks like its been leaking oil might that be part of the problem? should i check fluid?
That mud hole you ploughed through will eat out seal's in EVERYTHING, checking oil level's should be part of your wash down.. |
|
| Author: | sierra_666 [ Fri Aug 06, 2010 11:26 am ] |
| Post subject: | Re: diff whigne? |
oh you saw that didn't you??? it was quite big wasn't it i thought i was going to need a snatch, i don't have a socket or spanner big enough for the transfer case. otherwise i would of. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|