A/C, heater and blower fan circuts, door locks, power windows, pretty much everything that is not directly part of a sensor circut, or IGN/ FUEL relays.
| auszookers.com https://auszookers.com/forum/ |
|
| 1.6 efi question https://auszookers.com/forum/viewtopic.php?f=5&t=14036 |
Page 1 of 1 |
| Author: | finlay113 [ Tue Aug 03, 2010 3:53 am ] |
| Post subject: | 1.6 efi question |
puttin a 1.6 efi into my sierra today. started the wiring. do i need any of the body wiring? ive removed all of the headlight blinkers etc out of the main loom. just need to know what else i can cut out before it put it in? any help would be great thanks |
|
| Author: | Fatzook [ Tue Aug 03, 2010 4:10 am ] |
| Post subject: | Re: 1.6 efi question |
A/C, heater and blower fan circuts, door locks, power windows, pretty much everything that is not directly part of a sensor circut, or IGN/ FUEL relays.
|
|
| Author: | finlay113 [ Tue Aug 03, 2010 4:13 am ] |
| Post subject: | Re: 1.6 efi question |
do you know where i can get a wiring diagram from? |
|
| Author: | Fatzook [ Tue Aug 03, 2010 4:36 am ] |
| Post subject: | Re: 1.6 efi question |
never used one. I just trace the wires. Hasn't failed me yet 
|
|
| Author: | finlay113 [ Tue Aug 03, 2010 4:38 am ] |
| Post subject: | Re: 1.6 efi question |
thats what my plan is. was just goin to double check but ill just wing it. it'll be right |
|
| Author: | 4wheeljive [ Thu Aug 19, 2010 7:15 am ] |
| Post subject: | Re: 1.6 efi question |
ive got a few diagrams when i did my conversion but they are hard to read(poor quality)i just ended up tracing the wires |
|
| Author: | finlay113 [ Thu Aug 19, 2010 7:24 am ] |
| Post subject: | Re: 1.6 efi question |
mines all wired up now. just gotta fit up an exhaust n tidy it up |
|
| Author: | Hawky4X4 [ Fri Aug 20, 2010 11:49 am ] |
| Post subject: | Re: 1.6 efi question |
Hows that goin for ya? Im doin the same thing at the moment, wingd the wiring aswell so i hope it works. Wat did you do wen it came to the ignition, did you keep the old key or swap to the old one? |
|
| Author: | Fatzook [ Fri Aug 20, 2010 11:51 am ] |
| Post subject: | Re: 1.6 efi question |
Hawky4X4 wrote: Hows that goin for ya? Im doin the same thing at the moment, wingd the wiring aswell so i hope it works. Wat did you do wen it came to the ignition, did you keep the old key or swap to the old one?
Old key. You should be able to just wire the donor motors IGN wire into the sierra fuse box. |
|
| Author: | matty87 [ Fri Aug 20, 2010 2:20 pm ] |
| Post subject: | Re: 1.6 efi question |
Hawky4X4 wrote: Hows that goin for ya? Im doin the same thing at the moment, wingd the wiring aswell so i hope it works. Wat did you do wen it came to the ignition, did you keep the old key or swap to the old one?
a switch and a button:) id be keeping the old key from the sierra then no need to carry two around and it will be far neater |
|
| Author: | Hawky4X4 [ Sat Aug 21, 2010 6:25 am ] |
| Post subject: | Re: 1.6 efi question |
ok thanks guys 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|