| auszookers.com https://auszookers.com/forum/ |
|
| autotechnia bucket seats in zuk? https://auszookers.com/forum/viewtopic.php?f=5&t=14077 |
Page 1 of 1 |
| Author: | Jord [ Wed Aug 04, 2010 9:44 am ] |
| Post subject: | autotechnia bucket seats in zuk? |
hi all, sure tis been coverd 1000 times before but i got myself a pair of autotechnia bucket seats for my hj45 but i decided i want them in the zook and ill keep the hj45 original... so few questions do they fit in their easy? or should i say will they fit? seat rails? should i find some second hand factory ones and mod them or are they pretty easy/close to fit in with the universal rails it came with? thanks Jordan |
|
| Author: | 89_tintop [ Wed Aug 04, 2010 10:12 am ] |
| Post subject: | Re: autotechnia bucket seats in zuk? |
they do fit and are quite easy to fit.... use factory rails and redrill the wholes... only have to drill one hole per rail.. so 4 all up... easy as took me all of an hour to fit them up into mine. |
|
| Author: | Reubs [ Wed Aug 04, 2010 10:14 am ] |
| Post subject: | Re: autotechnia bucket seats in zuk? |
I have a set of Autotechnicas - maybe not the same model but mine fit and they are pretty wide - were fitted to patrol rails. They are a bit wide and rest against the pillar but they still fit. I have a coily and modified the standard seat rails. If you are using a universal rail kit don't use the ones that have the 'slider lock thingy' locking on only 1 side - they tend to put a twist in the seat. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|