What exactly do you mean by cracked? Where, length, depth etc? Pics help also. Just get it welded up if it's on the housing
| auszookers.com https://auszookers.com/forum/ |
|
| sierra rear diff https://auszookers.com/forum/viewtopic.php?f=5&t=14079 |
Page 1 of 1 |
| Author: | salih [ Wed Aug 04, 2010 10:25 am ] |
| Post subject: | sierra rear diff |
hey guys and girls my sierra rear diff has a crack in it not to big but still a crack im asking do i have to get a new rear diff? i got a new center diff i dont no if that will help in any way lol and if i have to get a new diff how much wouled a sierra wide track rear diff set me back ?? the recker that i use hasent got wide track sierras any other reckers in western suburbs of melbourne ? thanks |
|
| Author: | Rusho [ Wed Aug 04, 2010 10:31 am ] |
| Post subject: | Re: sierra rear diff |
What exactly do you mean by cracked? Where, length, depth etc? Pics help also. Just get it welded up if it's on the housing
|
|
| Author: | salih [ Wed Aug 04, 2010 10:36 am ] |
| Post subject: | Re: sierra rear diff |
ok you no where people get the smile face sticker put well right in the middel of that the hole isent big its a crack and its proberly as long as a 5 cent pice so not big at all you think weld it up ? i never thought of that lol |
|
| Author: | Gwagensteve [ Wed Aug 04, 2010 10:49 am ] |
| Post subject: | Re: sierra rear diff |
Meh - just weld it up. However, it's wise to know why it cracked in the first place. Steve. |
|
| Author: | salih [ Wed Aug 04, 2010 10:52 am ] |
| Post subject: | Re: sierra rear diff |
cracked because it got hit if you see the tank its pushed up a bit not losing any petrol so not fussed about that. the diff dont work any more i gess no oil. so tomorow will put in a new diff center and weld it up put oil in it and hope fully it will work (hopefully) |
|
| Author: | lukes_89 [ Wed Aug 04, 2010 11:04 am ] |
| Post subject: | Re: sierra rear diff |
i know a guy up the coast with wt housings and he wants 50$ for both housing bare then you would just have to transfer it all over |
|
| Author: | Gwagensteve [ Wed Aug 04, 2010 11:16 am ] |
| Post subject: | Re: sierra rear diff |
If it has to pull it all out anyway to swap housings why not just weld it up and call it good. Of the crack was at a spring pad or around the pumpkin, I'd tend to agree a new housing might be a good idea, but for a rock hit it's not worth it. Steve. |
|
| Author: | pyrohamish [ Wed Aug 04, 2010 11:57 am ] |
| Post subject: | Re: sierra rear diff |
on the note of diffs and the like, what is the spacing between the 4 bolts on the rear wheel. Need to pull and axle and was going to make a plate to connect the slide hammer to but the sierra isnt at my house. |
|
| Author: | skelaaleks [ Wed Aug 04, 2010 12:03 pm ] |
| Post subject: | Re: sierra rear diff |
You can just wack the wheel with a hammer I don't bother taking the wheel off the axle just undo the brake lines and take it out in one piece |
|
| Author: | salih [ Wed Aug 04, 2010 1:10 pm ] |
| Post subject: | Re: sierra rear diff |
thanks for the advice steve i think il just do that. i mean we have to put the new center in because the diff dont work any more and will its out il clean it up and weld it put new oil and shode be good as new. any ways thanks to every one for the advice. |
|
| Author: | whatulookinat [ Thu Aug 05, 2010 10:51 am ] |
| Post subject: | Re: sierra rear diff |
there is a wide track diif on ebay currently about $250 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|