| auszookers.com https://auszookers.com/forum/ |
|
| drum brakes https://auszookers.com/forum/viewtopic.php?f=5&t=14096 |
Page 1 of 1 |
| Author: | sbbunno [ Thu Aug 05, 2010 9:05 am ] |
| Post subject: | drum brakes |
so hear's the proplem im in the process of replacing drum brakes iv got the wheel off and all the nuts/screw etc off but cant get the hub off we'v givin it some from the hammer to losen it off but no go |
|
| Author: | royce [ Thu Aug 05, 2010 9:09 am ] |
| Post subject: | Re: drum brakes |
Sierra? bolt the wheel back onto teh drum and pull it off like that, its likely you have a big lip in the inner edge of the drum, youll need to get em machined |
|
| Author: | sbbunno [ Thu Aug 05, 2010 9:11 am ] |
| Post subject: | Re: drum brakes |
yea sierra sorry keep forgettin brilliant idea haha ill go try |
|
| Author: | atari4x4 [ Thu Aug 05, 2010 9:17 am ] |
| Post subject: | Re: drum brakes |
handbrake off? |
|
| Author: | Blueberry [ Thu Aug 05, 2010 9:32 am ] |
| Post subject: | Re: drum brakes |
if you chuck the wheel back on and some nuts loosely you can use it as a slide hammer, that usually works well. |
|
| Author: | sbbunno [ Thu Aug 05, 2010 9:39 am ] |
| Post subject: | Re: drum brakes |
hand brake fully off. i put the wheel back on and sure enough couple o yanks and it was off cheers heeps the pads are down to the metal ever since i put the 2" lift on the brakes have been engaged slightly and wearin down didn notice till to late. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|