| auszookers.com https://auszookers.com/forum/ |
|
| g16b dizzy problems. siera conversion https://auszookers.com/forum/viewtopic.php?f=5&t=14256 |
Page 1 of 1 |
| Author: | known2 [ Wed Aug 11, 2010 6:42 am ] |
| Post subject: | g16b dizzy problems. siera conversion |
howdy all. they have nearly finnished a mpfi 1.6 conversion on my siera. but the dizzy never came with the motor so one was sourced. now i'm told that they had to file down the center bolt to make it fit nearly 10mm, so the engine is retarding upon acceleration breifly before starting to advance. so it cant be the right dizzy. but it has a 5 pin plug that goes into the wiring loom.. now i'm told there is no g16 dizzy that has a five pin plug, so i'm left wondering what dizzy do i have and wich one do i need? any idea's guys? |
|
| Author: | steak_knife [ Wed Aug 11, 2010 7:22 am ] |
| Post subject: | Re: g16b dizzy problems. siera conversion |
X90 is 5 pin.. |
|
| Author: | known2 [ Wed Aug 11, 2010 9:24 am ] |
| Post subject: | Re: g16b dizzy problems. siera conversion |
interesting, your the 2nd person to tell me that. so between the vitara and xc90 the dizzy must be different. the rocker cover is dark blue wich i havnt seen on a vitara. |
|
| Author: | royce [ Wed Aug 11, 2010 9:28 am ] |
| Post subject: | Re: g16b dizzy problems. siera conversion |
my vitara has a 5 pin, but its the late model that shares everyhting with the x90 whats the front of the sump like? does it have an indent and a hole up the top? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|