| auszookers.com https://auszookers.com/forum/ |
|
| rims https://auszookers.com/forum/viewtopic.php?f=5&t=14275 |
Page 1 of 1 |
| Author: | russty_2008 [ Thu Aug 12, 2010 7:07 am ] |
| Post subject: | rims |
100 series cruiser rims fit on a sierra |
|
| Author: | russty_2008 [ Thu Aug 12, 2010 7:08 am ] |
| Post subject: | Re: rims |
will they lol |
|
| Author: | lump_a_charcoal [ Thu Aug 12, 2010 7:08 am ] |
| Post subject: | Re: rims |
Don't think so. |
|
| Author: | Westie [ Thu Aug 12, 2010 7:10 am ] |
| Post subject: | Re: rims |
NO they will not. They just are off slightly |
|
| Author: | Gwagensteve [ Thu Aug 12, 2010 7:44 am ] |
| Post subject: | Re: rims |
Slightly? 100 series are 150mm PCD (5.905") Suzuki are 5 on 5.5" or 139.7mm As an aside, think of the weight 100 series cruiser rims are designed for - they are pretty heavy, and unsprung weight is very unhelpful for ride and handling. I have learnt this from experience. I have two sets of swampers - 9/34 and Q78. They are (reasonably) close in diameter, construction and tread pattern. Both sets are on beadlocked steel rims, and the 9/34's are on rims with more offset. on the q78's the tail wags the dog - it drives HEAPS better with the 34's - it even feels like it rides softer. Steve. |
|
| Author: | whincup [ Thu Aug 12, 2010 12:19 pm ] |
| Post subject: | Re: rims |
..arent 100 series cruisers a 6 stud rim pattern anyway? |
|
| Author: | atari4x4 [ Thu Aug 12, 2010 12:22 pm ] |
| Post subject: | Re: rims |
whincup wrote: ..arent 100 series cruisers a 6 stud rim pattern anyway?
nah they're 5 stud. |
|
| Author: | lump_a_charcoal [ Thu Aug 12, 2010 1:04 pm ] |
| Post subject: | Re: rims |
atari4x4 wrote: whincup wrote: ..arent 100 series cruisers a 6 stud rim pattern anyway? nah they're 5 stud. Yeah mine are 5 stud. |
|
| Author: | BlueSuzy [ Thu Aug 12, 2010 1:14 pm ] |
| Post subject: | Re: rims |
Some are 6. |
|
| Author: | lump_a_charcoal [ Thu Aug 12, 2010 1:34 pm ] |
| Post subject: | Re: rims |
Older ones, yes. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|