auszookers.com
https://auszookers.com/forum/

jimny death shake
https://auszookers.com/forum/viewtopic.php?f=5&t=14322		 Page 1 of 1
Author:  dangerousdog [ Sat Aug 14, 2010 1:05 pm ]
Post subject:  jimny death shake
hay all went out on a night run havent been on one for a bit forgot how fun thay are. Well all was good till i got to the hill :roll: started going up it was a bit harder than i was thinking so i gave it a bit more right foot dident see the big rock and BANG the frunt left hit it all was good but my sports steering wheel was upside down ? WTF i was thinking. so it was time to head off all was good till i hit the black stuff i had just slowed down to take a turn and the steering wheel started to shake and it took all i had to hold on to it and pull over off the road (now im not piss week) I jump out have a look all seems fine so jump back in and off i go get to the next bend slow down same shit hapends. I stop think OMG this jimny is trying to kill me was a long drive home but i got home and it dident happen agen

anyony have this happen befor
Author:  Benz [ Sat Aug 14, 2010 1:46 pm ]
Post subject:  Re: jimny death shake
bent something? :S
Author:  Zooksta [ Sat Aug 14, 2010 2:42 pm ]
Post subject:  Re: jimny death shake
Probaly some mud inside the rims that unbalanced it. Mine gets the shakes bad at about 70 kmh when the wheels need balancing, scary shit
Author:  royce [ Sat Aug 14, 2010 9:27 pm ]
Post subject:  Re: jimny death shake
If the steering wheel isnt where its supposed to be youve bent something, likely the steering arm between the 2 wheels
Author:  Lockie666 [ Sun Aug 15, 2010 3:42 am ]
Post subject:  Re: jimny death shake
royce wrote:
If the steering wheel isnt where its supposed to be youve bent something, likely the steering arm between the 2 wheels


X2
Author:  dangerousdog [ Mon Aug 16, 2010 8:04 am ]
Post subject:  Re: jimny death shake
well i bent somthing its the rod that go's from the diff to the chasis what is that one called and anyone no where i can find one im down geelong (vic) and cant find one
Author:  atari4x4 [ Mon Aug 16, 2010 8:10 am ]
Post subject:  Re: jimny death shake
sounds like the panhard rod is bent, it's the one that isn't attached to the steering!
Author:  dangerousdog [ Mon Aug 16, 2010 8:13 am ]
Post subject:  Re: jimny death shake
thats the one
Author:  dangerousdog [ Thu Aug 19, 2010 9:37 am ]
Post subject:  Re: jimny death shake
ok i got a new panhard bar today from tough dog looks to be the goods
http://www.toughdogdealer.com.au/jimny.htm
looks ezy to put in just 2 bolts but is there anything i should know befor i give it a go????

thanks
Author:  steak_knife [ Thu Aug 19, 2010 10:47 am ]
Post subject:  Re: jimny death shake
Keep an eye on the locking nut, thay have a coarse thread & like to come undone..
Author:  atari4x4 [ Thu Aug 19, 2010 11:00 am ]
Post subject:  Re: jimny death shake
if it's adjustable, adjust it so it's the same length as the original one from hole to hole before you fit it.
Author:  steak_knife [ Thu Aug 19, 2010 11:09 am ]
Post subject:  Re: jimny death shake
atari4x4 wrote:
if it's adjustable, adjust it so it's the same length as the original one from hole to hole before you fit it.


What if it's lifted tho??
Author:  96coily [ Fri Aug 20, 2010 7:17 am ]
Post subject:  Re: jimny death shake
steknig wrote:
atari4x4 wrote:
if it's adjustable, adjust it so it's the same length as the original one from hole to hole before you fit it.


What if it's lifted tho??


It'll get him close
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/