want33s wrote:
Isn't that the block on the inside of the RH chassis rail on WTs just in front of the back wheel.
1.0s & 1.3NTs don't have it.
1.0s & 1.3NTs don't have it.
yes and yes
| auszookers.com https://auszookers.com/forum/ |
|
| pressure line residule valve, do sierra's have them ? https://auszookers.com/forum/viewtopic.php?f=5&t=14340 |
Page 1 of 1 |
| Author: | oozuk [ Sun Aug 15, 2010 10:43 am ] |
| Post subject: | pressure line residule valve, do sierra's have them ? |
here's a question i've never asked, are the sierra master cylinders equipped with a pressure line residual valve ? If so have people been removing them when they fit rear disc brakes ? |
|
| Author: | royce [ Sun Aug 15, 2010 10:54 am ] |
| Post subject: | Re: pressure line residule valve, do sierra's have them ? |
ive been told they do, perhaps in the joiner thingo under the master cyl my 1 litre was 4 wheel drum and I changed it to 4 wheel disc with the original master cylinder, seemed to work ok |
|
| Author: | want33s [ Sun Aug 15, 2010 9:11 pm ] |
| Post subject: | Re: pressure line residule valve, do sierra's have them ? |
Isn't that the block on the inside of the RH chassis rail on WTs just in front of the back wheel. 1.0s & 1.3NTs don't have it. |
|
| Author: | shep [ Sun Aug 15, 2010 9:33 pm ] |
| Post subject: | Re: pressure line residule valve, do sierra's have them ? |
want33s wrote: Isn't that the block on the inside of the RH chassis rail on WTs just in front of the back wheel.
1.0s & 1.3NTs don't have it. yes and yes
|
|
| Author: | oozuk [ Tue Aug 17, 2010 7:11 pm ] |
| Post subject: | Re: pressure line residule valve, do sierra's have them ? |
good to know, my L\H\R Caliper was dragging so was unsure if OOZUK still had one or not, turns out must be a shitty caliper then |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|