Bendix have a "anti squeal" pad on the back anyway, so as long as your slide's are still moving freely, fit em..
| auszookers.com https://auszookers.com/forum/ |
|
| Anti-squeak/rubber grease when changing brake pads https://auszookers.com/forum/viewtopic.php?f=5&t=14492 |
Page 1 of 1 |
| Author: | TheOtherLeft [ Sun Aug 22, 2010 12:55 am ] |
| Post subject: | Anti-squeak/rubber grease when changing brake pads |
Hiya all, I'm about to change the front brake pads on my GV. Is it necessary to use anti squeak grease or rubber grease? I have the service manual and it says to use rubber grease on the cylinder slide pin/bolt. I've never used this grease before when changing pads in the past. What about anti squeak grease? Where do I put this? I've read about this grease on this forum but there's no mention of it in the service manual. Cheers, Ben |
|
| Author: | steak_knife [ Sun Aug 22, 2010 2:03 am ] |
| Post subject: | Re: Anti-squeak/rubber grease when changing brake pads |
TheOtherLeft wrote: Hiya all,
I'm about to change the front brake pads on my GV. Is it necessary to use anti squeak grease or rubber grease? I have the service manual and it says to use rubber grease on the cylinder slide pin/bolt. I've never used this grease before when changing pads in the past. What about anti squeak grease? Where do I put this? I've read about this grease on this forum but there's no mention of it in the service manual. Cheers, Ben Did that come with the pad's?? Black or white grease?? If your slide's are still moving freely I wouldn't worry to much about new grease, if thay are a lil stuck I'd be inclined to clean them well & re-grease with either rubber grease or HTB( high temp bearing grease), most grease that come with gen pad's is for in between the pad & the caliper, the bit's that touch.. |
|
| Author: | TheOtherLeft [ Sun Aug 22, 2010 3:12 am ] |
| Post subject: | Re: Anti-squeak/rubber grease when changing brake pads |
I bought Bendix 4WD pads. They didn't come with any grease. I thought maybe I have to buy them extra??? |
|
| Author: | steak_knife [ Sun Aug 22, 2010 3:56 am ] |
| Post subject: | Re: Anti-squeak/rubber grease when changing brake pads |
Bendix have a "anti squeal" pad on the back anyway, so as long as your slide's are still moving freely, fit em..
|
|
| Author: | TheOtherLeft [ Sun Aug 22, 2010 6:01 am ] |
| Post subject: | Re: Anti-squeak/rubber grease when changing brake pads |
steak_knife wrote: Bendix have a "anti squeal" pad on the back anyway, so as long as your slide's are still moving freely, fit em..
Cheers thanks for the advice mate. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|