| auszookers.com https://auszookers.com/forum/ |
|
| spidertrax shock tilter https://auszookers.com/forum/viewtopic.php?f=5&t=14494 |
Page 1 of 2 |
| Author: | 31zook [ Sun Aug 22, 2010 2:36 am ] |
| Post subject: | spidertrax shock tilter |
I bought this off lowrange and was wondering if there was any difference between sierra shock spacings. It's pictured on a lwb 1.3 NT. 
This is what it looks like in full 
It's about half a bolt width out, is it a product error or is there different types of spacings... The other end is on the stud btw yes i know i have a leaky pinion seal 
cheers 
|
|
| Author: | atari4x4 [ Sun Aug 22, 2010 3:05 am ] |
| Post subject: | Re: spidertrax shock tilter |
thats not a leaky pinion seal, it's rust proofing 
did the yanks get the NT's? I know they get confused when talking about NT & WT. |
|
| Author: | shep [ Sun Aug 22, 2010 3:20 am ] |
| Post subject: | Re: spidertrax shock tilter |
there must be a difference as i had a lowrange one on my WT SWB and it wont fit my NT LWB. |
|
| Author: | atari4x4 [ Sun Aug 22, 2010 3:22 am ] |
| Post subject: | Re: spidertrax shock tilter |
http://auszookers.com/index.php?name=Fo ... wforum&f=7 |
|
| Author: | 31zook [ Sun Aug 22, 2010 3:25 am ] |
| Post subject: | Re: spidertrax shock tilter |
 @ atari
yeah righto, i looks really good, so i might just, sell it off.... or go to a engineering shop and get them to mill it out a touch so it fit's.... But before i go spending money if anyone wants it for $50 they can have it.... |
|
| Author: | shep [ Sun Aug 22, 2010 3:25 am ] |
| Post subject: | Re: spidertrax shock tilter |
bugger that atari, i would make it fit because it looks very flash
|
|
| Author: | atari4x4 [ Sun Aug 22, 2010 3:31 am ] |
| Post subject: | Re: spidertrax shock tilter |
yeah i'd be keen to fit it also... i don't think modifying it will work unless you can make it longer somehow? $50 seems like a bargain if you're going to sell it!!! |
|
| Author: | 31zook [ Sun Aug 22, 2010 3:41 am ] |
| Post subject: | Re: spidertrax shock tilter |
it only cost $50 to buy from there and it was just in with all my postage.... If i go to the shop and ask to get the outer ends of each hole milled out 8mm, it should fit in theory, that would leave a 1mm tolerance... i could even cut each end with a grinder to make it a slot as the bolts will stop it from coming forward and it won't slide off either way... i could pack it so it won't slide across ways... |
|
| Author: | steak_knife [ Sun Aug 22, 2010 3:54 am ] |
| Post subject: | Re: spidertrax shock tilter |
I'm told the Lwb's are different at the upper shocky mount's.. Allso the rear seat bracket in the Lwb's get in the way of the after market shock leany overy thingy's. |
|
| Author: | 31zook [ Sun Aug 22, 2010 4:03 am ] |
| Post subject: | Re: spidertrax shock tilter |
lucky i don't want rear seats.... |
|
| Author: | shep [ Sun Aug 22, 2010 4:26 am ] |
| Post subject: | Re: spidertrax shock tilter |
my LWB has two different seat/seatbelt options. the seat can either be close to the front seats or against the tailgate. |
|
| Author: | 89_tintop [ Sun Aug 22, 2010 5:27 am ] |
| Post subject: | Re: spidertrax shock tilter |
i would like it... but couldnt grab it for a few weeks.... just spent all my coin on my transfer gears |
|
| Author: | 2stroker [ Sun Aug 22, 2010 7:05 am ] |
| Post subject: | Re: spidertrax shock tilter |
Just looking at the pics, if that is bolted on to the original shockie mounts and then bolts go through 2 of the 5?? middle holes to hold the top of the shockies in at an angle, you will be spacing the top forward the thickness of that thing, wont this be also pushing the shockies forward at the top so that they don't sit flush and square on the mounting bolts and bottom plate ? |
|
| Author: | 31zook [ Sun Aug 22, 2010 6:38 pm ] |
| Post subject: | Re: spidertrax shock tilter |
yes, your right, it woulkd push the top shock mount about 40mm forward. |
|
| Author: | 2stroker [ Mon Aug 23, 2010 9:52 pm ] |
| Post subject: | Re: spidertrax shock tilter |
Ok did someone work out if there is a slight difference in position between NT and WT top rear shockie mounts. I know that NT is 590 apart. |
|
| Author: | shep [ Mon Aug 23, 2010 10:20 pm ] |
| Post subject: | Re: spidertrax shock tilter |
i think that it is LWB that are different. |
|
| Author: | just_cruizin [ Mon Aug 23, 2010 10:28 pm ] |
| Post subject: | Re: spidertrax shock tilter |
Pushing the top of the shock forward will make it hit on the diff worse then most aftermarket shocks already do. A bit of rhs bolted to the top of the crossmember with bolts works just as well |
|
| Author: | BlueSuzy [ Tue Aug 24, 2010 12:23 am ] |
| Post subject: | Re: spidertrax shock tilter |
If you use that bar, Cant you just turn the spring plates around and run shocks on the front? |
|
| Author: | Fatzook [ Tue Aug 24, 2010 2:15 am ] |
| Post subject: | Re: spidertrax shock tilter |
BlueSuzy wrote: If you use that bar, Cant you just turn the spring plates around and run shocks on the front?
That would move the lower end of the shock 100mm+ forward. So they would then hit on the front of the axle tube instead of the rear. 
I am drawing one up ATM that allows you to lay the shocks in, but does not space the upper mounts forwards. Pics up on wednesday night. |
|
| Author: | BlueSuzy [ Tue Aug 24, 2010 2:49 am ] |
| Post subject: | Re: spidertrax shock tilter |
Fatzook wrote: BlueSuzy wrote: If you use that bar, Cant you just turn the spring plates around and run shocks on the front? That would move the lower end of the shock 100mm+ forward. So they would then hit on the front of the axle tube instead of the rear. I am drawing one up ATM that allows you to lay the shocks in, but does not space the upper mounts forwards. Pics up on wednesday night.
Move your diff back. |
|
| Author: | Fatzook [ Tue Aug 24, 2010 3:07 am ] |
| Post subject: | Re: spidertrax shock tilter |
BlueSuzy wrote: Move your diff back. Yep. The leg bones' connected to the hip bone
|
|
| Author: | BlueSuzy [ Tue Aug 24, 2010 3:26 am ] |
| Post subject: | Re: spidertrax shock tilter |
But move your tank 1st. |
|
| Author: | shep [ Tue Aug 24, 2010 3:52 am ] |
| Post subject: | Re: spidertrax shock tilter |
BlueSuzy wrote: But move your tank 1st.
i recently found that the tank is a great thing for keeping the diff sort of located when the diff wants to flop around. 
|
|
| Author: | Zook_Fan [ Wed Aug 25, 2010 8:57 am ] |
| Post subject: | Re: spidertrax shock tilter |
Fatzook wrote: BlueSuzy wrote: If you use that bar, Cant you just turn the spring plates around and run shocks on the front? That would move the lower end of the shock 100mm+ forward. So they would then hit on the front of the axle tube instead of the rear. I am drawing one up ATM that allows you to lay the shocks in, but does not space the upper mounts forwards. Pics up on wednesday night. Can you make some plates that the U-bolts bolt down from the top instead of the bottom so there is less to get hung up on? |
|
| Author: | BlueSuzy [ Wed Aug 25, 2010 11:03 pm ] |
| Post subject: | Re: spidertrax shock tilter |
shep wrote: BlueSuzy wrote: But move your tank 1st. i recently found that the tank is a great thing for keeping the diff sort of located when the diff wants to flop around. I Concur. Ages ago i snapped a mazda leaf, the tank stopped the diff from moving back so i wasnt massively crab walking driving home... |
|
| Author: | shep [ Thu Aug 26, 2010 12:01 am ] |
| Post subject: | Re: spidertrax shock tilter |
BlueSuzy wrote: shep wrote: BlueSuzy wrote: But move your tank 1st. i recently found that the tank is a great thing for keeping the diff sort of located when the diff wants to flop around. I Concur. Ages ago i snapped a mazda leaf, the tank stopped the diff from moving back so i wasnt massively crab walking driving home... haha you rough bastard, at least nobody lives here
|
|
| Author: | thriller [ Sat Aug 28, 2010 11:53 pm ] |
| Post subject: | Re: spidertrax shock tilter |
amatuer quesytion but what is the point of shock tilters?? |
|
| Author: | 2stroker [ Sun Aug 29, 2010 12:12 am ] |
| Post subject: | Re: spidertrax shock tilter |
thriller wrote: amatuer quesytion but what is the point of shock tilters??
When you run longer shockies you need to move the top mount up so that the shock does not bottom out, however with the rear there is no going up because the floor is there so it has to go inward to make up for the extra length. In the front you can go up because the shockie is mounted inside the front guard well. In the front people use shock hoops or "stealth mounts" or they extend their bump stops. In my opinion extending bump stops to stop shockies bottoming out is a poor practice because although with the longer shockies you may gain something in the axles ability to travel further down you will loose most of it in the axles ability to travel upward. |
|
| Author: | 31zook [ Sun Aug 29, 2010 1:13 am ] |
| Post subject: | Re: spidertrax shock tilter |
sold will post monday arvo
|
|
| Author: | thriller [ Wed Sep 01, 2010 9:13 am ] |
| Post subject: | Re: spidertrax shock tilter |
ok thanks for the insight. shock hoops get welded onto your chassis when lifting yeah? |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|