http://cgi.ebay.com.au/VALVE-SPRING-COM ... 0195578730
One of them, air hold's the valve shut while you compress the spring &so on..
Not a cheat tho..
| auszookers.com https://auszookers.com/forum/ |
|
| Replacing valve stem seals on a G13BB.. ?? https://auszookers.com/forum/viewtopic.php?f=5&t=14500 |
Page 1 of 1 |
| Author: | billrogers [ Sun Aug 22, 2010 7:48 am ] |
| Post subject: | Replacing valve stem seals on a G13BB.. ?? |
Has anyone done this the 'cheat ' way,, without removing the head ??? Can it be done ?? Cold start up lets a cloud of blue(oil) smoke from the exhaust so I suspect the stem seals... unless there is another possible cause ?? I am using about 1l oil in 7000k ........... Bill |
|
| Author: | steak_knife [ Sun Aug 22, 2010 7:53 am ] |
| Post subject: | Re: Replacing valve stem seals on a G13BB.. ?? |
http://cgi.ebay.com.au/VALVE-SPRING-COM ... 0195578730 One of them, air hold's the valve shut while you compress the spring &so on..
Not a cheat tho..
|
|
| Author: | alien [ Sun Aug 22, 2010 8:04 am ] |
| Post subject: | Re: Replacing valve stem seals on a G13BB.. ?? |
i've just come from the same problem - is it only on startup and nothing else? if so then yeah, stem seals... mine also smoked under load, it was assumed to be rings but was infact steam seals and undersized valve guides on the intake side (all 4). |
|
| Author: | shep [ Sun Aug 22, 2010 8:44 am ] |
| Post subject: | Re: Replacing valve stem seals on a G13BB.. ?? |
i got a ABW one on a clearance sale for $10 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|