[SuziBlu]

Folks, I have really stuffed the front right hand assembly, cannot get the stub axle apart from the backing plate, the bearings are frozen, its cactus.

Is the stub axle assembly on a nt 1.3 the same as on a nt 1l

I have suziblu here who is without a carb for the time being, and I can rat her if its all good.

Cheers David

[ajsr]

Dave I have a spare stub here (probably the whole assy two)I'm pretty sure if you need one.

[SuziBlu]

Ahh man, that would be grouse, I need the whole lot, backing plate etc, im pretty sure looking at the one on suziblu they are the same, so I can use that, but of course that leaves me short.

[ajsr]

so you need a complete 1.3 nt or wt stub axle assy from the swivel outward to the locking hub. correct?

[want33s]

ajsr wrote:

so you need a complete 1.3 nt or wt stub axle assy from the swivel outward to the locking hub. correct?

Not quite..
He has busted the hub on his 1.0 Maruti and wants to know if 1.0 Maruti hub assembly is same as Sierra NT 1.3...

[ajsr]

sorry dave if its 1lt you need I cant help, sorry to get you exited dude.
If i can help with anything your welcome to it though

[SuziBlu]

If the 1.3l is the same as the 1l, like I say, I have had a look at the one on suziblu, she be a drover/ nt 1.3l, an the look the same, but thats without measuring, an its a bit late an raining to go pulling things apart so late, doh.

If it is the same, yea, everything, sorry I cannot be more definitive.

Driving into lincoln for a chiros appointment today, front right went on me, thru me over to the other side of the road, thankfully no oncoming traffic or I would not be here.

[royce]

pre Maruti 1 litre is the same as 1.3 so I cant see why not, just undo the 4 bolts and see

hell they even fit on vits, but I didnt say that

[steak_knife]

royce wrote:

pre Maruti 1 litre is the same as 1.3 so I cant see why not, just undo the 4 bolts and see

hell they even fit on vits, but I didnt say that

[joeblow]

want33s wrote:

ajsr wrote:

so you need a complete 1.3 nt or wt stub axle assy from the swivel outward to the locking hub. correct?

Not quite..
He has busted the hub on his 1.0 Maruti and wants to know if 1.0 Maruti hub assembly is same as Sierra NT 1.3...

yes, yes and yes.

[303zuke]

All leafy Sierras have the same Knuckle, Spindle, Bearings, Hubs and FWH's, regardless of weather they are Disc or Drum front brakes. They also have the same Kingpins, KP bearings and Swivel seals and these are also the same as LJ's.