auszookers.com :: View topic - G16b conversion questions/advice

Hey guys i have a few queries regarding a g16b-sierra converson i am about to start. I know there are countless threads on here about this subject but all the info seems to get diluted. So here goes...
I am looking at buying a 2000 model baleno with the manual box.
What i would like to know is.

Will my extractors from my 8v 1.6 fit this engine ? NO
In relation to the attched picture, what is the deal with these cooling hoses/ protrusion from the block ? will this interfere with the firewall ? YES
What fuel pressure is required ? i was looking at runnign a 2l external surge tank with an inline lo pressure pump to it then an inline hi press pump to the motor. Will this setup work ? YES will i need a fuel pressure regulator ? THERE IS ONE ON THE FUEL RAIL ALREADY
Do the sierra cooling hoses work ? NOT REALLY
http://www.facebook.com/album.php?aid=2 ... =fbx_album (in the red square)
Anything else trouble wise you think is worth mentioning please do.
Thanks heaps in advance
Jonny

So will the 16v vitara extractors work ? YES
Can anything be done about these pesky cooling hoses on the back of the motor ? YOU WILL NEED TO MAKE A 90* ADAPTOR
so i can run any external efi pump ? YES. STICK WITH SOMETHING COMMON. THAT WAY SPARES ARE EASIER TO COME BY. VL COMMODORE PUMP IS A POPULAR CHOICE
and what parts are required to plumb the 1.6's cooling system into the radiator ? WHAT CONDITION IS YOUR RADIATOR IN?
cheers

So will the 16v vitara extractors work ?
Can anything be done about these pesky cooling hoses on the back of the motor ? yep the one your worried about is the thermostat housing get rid of it and put a right angle on there or bash the firwall.
so i can run any external efi pump ? yep you can or if you are getting the whole car use the baleno swimmer
and what parts are required to plumb the 1.6's cooling system into the radiator ? i cant answer that my rads on the back and we used 10 bar oil suction water hose
cheers

ok thanks a lot for your help guys. ummm i dont thik i will have to worry about a conversion kit as i already have an 8 valve 1.6 in mine so i shuld be able to use the kit already in it ?

Author:	straty [ Tue Aug 31, 2010 9:58 am ]
Post subject:	G16b conversion questions/advice
Hey guys i have a few queries regarding a g16b-sierra converson i am about to start. I know there are countless threads on here about this subject but all the info seems to get diluted. So here goes... I am looking at buying a 2000 model baleno with the manual box. What i would like to know is. Will my extractors from my 8v 1.6 fit this engine ? In relation to the attched picture, what is the deal with these cooling hoses/ protrusion from the block ? will this interfere with the firewall ? What fuel pressure is required ? i was looking at runnign a 2l external surge tank with an inline lo pressure pump to it then an inline hi press pump to the motor. Will this setup work ? will i need a fuel pressure regulator ? Do the sierra cooling hoses work ? http://www.facebook.com/album.php?aid=2 ... =fbx_album (in the red square) Anything else trouble wise you think is worth mentioning please do. Thanks heaps in advance Jonny

Author:	Fatzook [ Tue Aug 31, 2010 10:07 am ]
Post subject:	Re: G16b conversion questions/advice
straty wrote: Hey guys i have a few queries regarding a g16b-sierra converson i am about to start. I know there are countless threads on here about this subject but all the info seems to get diluted. So here goes... I am looking at buying a 2000 model baleno with the manual box. What i would like to know is. Will my extractors from my 8v 1.6 fit this engine ? NO In relation to the attched picture, what is the deal with these cooling hoses/ protrusion from the block ? will this interfere with the firewall ? YES What fuel pressure is required ? i was looking at runnign a 2l external surge tank with an inline lo pressure pump to it then an inline hi press pump to the motor. Will this setup work ? YES will i need a fuel pressure regulator ? THERE IS ONE ON THE FUEL RAIL ALREADY Do the sierra cooling hoses work ? NOT REALLY http://www.facebook.com/album.php?aid=2 ... =fbx_album (in the red square) Anything else trouble wise you think is worth mentioning please do. Thanks heaps in advance Jonny

Author:	straty [ Tue Aug 31, 2010 10:16 am ]
Post subject:	Re: G16b conversion questions/advice
So will the 16v vitara extractors work ? Can anything be done about these pesky cooling hoses on the back of the motor ? so i can run any external efi pump ? and what parts are required to plumb the 1.6's cooling system into the radiator ? cheers

Author:	steak_knife [ Tue Aug 31, 2010 10:18 am ]
Post subject:	Re: G16b conversion questions/advice
& if you get a conversion kit from the state's, just remember when thay say passenger side eng mount, it's our driver's side.. Took me age's to figure that out..

Author:	Fatzook [ Tue Aug 31, 2010 10:21 am ]
Post subject:	Re: G16b conversion questions/advice
straty wrote: So will the 16v vitara extractors work ? YES Can anything be done about these pesky cooling hoses on the back of the motor ? YOU WILL NEED TO MAKE A 90* ADAPTOR so i can run any external efi pump ? YES. STICK WITH SOMETHING COMMON. THAT WAY SPARES ARE EASIER TO COME BY. VL COMMODORE PUMP IS A POPULAR CHOICE and what parts are required to plumb the 1.6's cooling system into the radiator ? WHAT CONDITION IS YOUR RADIATOR IN? cheers

auszookers.com https://auszookers.com/forum/

G16b conversion questions/advice https://auszookers.com/forum/viewtopic.php?f=5&t=14705	Page 1 of 1

Author:	matty87 [ Tue Aug 31, 2010 10:25 am ]
Post subject:	Re: G16b conversion questions/advice
straty wrote: So will the 16v vitara extractors work ? Can anything be done about these pesky cooling hoses on the back of the motor ? yep the one your worried about is the thermostat housing get rid of it and put a right angle on there or bash the firwall. so i can run any external efi pump ? yep you can or if you are getting the whole car use the baleno swimmer and what parts are required to plumb the 1.6's cooling system into the radiator ? i cant answer that my rads on the back and we used 10 bar oil suction water hose cheers

Author:	straty [ Tue Aug 31, 2010 12:21 pm ]
Post subject:	Re: G16b conversion questions/advice
ok thanks a lot for your help guys. ummm i dont thik i will have to worry about a conversion kit as i already have an 8 valve 1.6 in mine so i shuld be able to use the kit already in it ?

Author:	Fatzook [ Tue Aug 31, 2010 12:40 pm ]
Post subject:	Re: G16b conversion questions/advice
straty wrote: ok thanks a lot for your help guys. ummm i dont thik i will have to worry about a conversion kit as i already have an 8 valve 1.6 in mine so i shuld be able to use the kit already in it ? Correct

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/