pull the spacer off, if it was from an auto it will not suit any 1.6 manual flywheel.
| auszookers.com https://auszookers.com/forum/ |
|
| vitara flywheel https://auszookers.com/forum/viewtopic.php?f=5&t=14727 |
Page 1 of 1 |
| Author: | scarecow [ Wed Sep 01, 2010 9:11 am ] |
| Post subject: | vitara flywheel |
hey, i have a 1989 model vitara with a g16a motor in it, i know the motor was replaced my the last owner but i dont know what year model it is, its carbie, the auto gearbox that was in it shit it self, so i bought a manual box to go into it aswell as everything else to do a manual conversion, although when i tryed to fit up the flywheel it wouldnt fit due to what looks like a spacer on the end of the cranksahft its fairly firm on there and im not to keen on pulling it off unless im sure i need to, i can tell it is a spacer because it has kicked sideways and i can only see half of all the threads, has anyone else had this trouble or do i need to get another flywheel that doesnt have a lip and sits flusher on it? cheers |
|
| Author: | joeblow [ Wed Sep 01, 2010 9:43 am ] |
| Post subject: | Re: vitara flywheel |
pull the spacer off, if it was from an auto it will not suit any 1.6 manual flywheel.
|
|
| Author: | scarecow [ Wed Sep 01, 2010 9:51 am ] |
| Post subject: | Re: vitara flywheel |
yeah ive already pulled a spacer off it was only loosly on when i took the flex plate off, but this spacer looks like its a tight fit so i duno if it should come off, do u know if where the treads are tapped is it meant to be flat and not have a lip on it that must have acted like a spiggot bearing for the flex plate? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|