| auszookers.com https://auszookers.com/forum/ |
|
| Vitara bearing ????? https://auszookers.com/forum/viewtopic.php?f=5&t=14747 |
Page 1 of 1 |
| Author: | sharky [ Wed Sep 01, 2010 11:29 pm ] |
| Post subject: | Vitara bearing ????? |
hi, Was making a squealling noise on and off. turning corners ect. Braking would seem to fix it. So i assume its down to the metal on the pads. but theres a heap of meat left on the pads. Wash all the mud off from around the caliper area and thought that will solve it. Did for ten mins then it returns Any ideas??? im assuming the bearing may be shot.. Will i need a press or can i flog it out with a big socket?? Cheers Sharky |
|
| Author: | Rusho [ Wed Sep 01, 2010 11:36 pm ] |
| Post subject: | Re: Vitara bearing ????? |
Bearings for sure. Press would be better, but hammer and punch might get you through. Good luck. Shoot weaves a pm, he works at a bearing place, good prices and always gets it right. |
|
| Author: | royce [ Thu Sep 02, 2010 12:28 am ] |
| Post subject: | Re: Vitara bearing ????? |
if you had enough mud to wash off the calipers youll want to pull em off and clean em properly |
|
| Author: | sharky [ Sat Sep 04, 2010 7:29 am ] |
| Post subject: | Re: Vitara bearing ????? |
gave up trying to bash it out. How much to get someone to press out? |
|
| Author: | DarkHorse [ Sat Sep 04, 2010 7:34 am ] |
| Post subject: | Re: Vitara bearing ????? |
I had a quote the other day from Pedders of $700 to change the rear bearings on the Vit. Local mechanic said maybe $500. Most of that of course is the labour, so if you've got everything apart it will be much much much less. |
|
| Author: | sharky [ Sat Sep 04, 2010 7:46 am ] |
| Post subject: | Re: Vitara bearing ????? |
DarkHorse wrote: I had a quote the other day from Pedders of $700 to change the rear bearings on the Vit. Local mechanic said maybe $500. Most of that of course is the labour, so if you've got everything apart it will be much much much less. robbery? yeah its all pulled down and i got the bearing for $80
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|