[BlueSuzy]

Does it just slip off or do i have to undo the ?17mm? main crank bolt?

I cant remember, i have done it before, but it was years ago.

My pulley has the teeth parts for the crank sensor for a Baleno motor.

Trying to replace the crank seal down there.

Any help would be great, Thanks.

[want33s]

5 X M6 bolts(10mm head) hold the pulley on and one M12 (17mm head)holds the bottom belt drive on.

[BlueSuzy]

Ok, thats what im after. My 5 small bolts were 8mm socket heads. Like the top cam cover.

Time to get her in lowrange and in gear with a big hammer on a spanner!

Thanks

[royce]

not low range, high range 5th

[want33s]

BlueSuzy wrote:

Ok, thats what im after. My 5 small bolts were 8mm socket heads. Like the top cam cover.

Time to get her in lowrange and in gear with a big hammer on a spanner!

Thanks

Mine are 8mm too now I think about it but mine are hex heads not socket heads.

[BlueSuzy]

ok will try 5th..
I meant hex heads - 8mm socket.