jonno_racing wrote:
were all your bushings fucked?
i wouldnt mind some rubber ones for my new arms.
i wouldnt mind some rubber ones for my new arms.
Yes. Proper fucked.
| auszookers.com https://auszookers.com/forum/ |
|
| Rear control arms, (coily) https://auszookers.com/forum/viewtopic.php?f=5&t=14958 |
Page 1 of 1 |
| Author: | coily96 [ Wed Sep 08, 2010 10:44 am ] |
| Post subject: | Rear control arms, (coily) |
Im looking to change the bushes in the control arms to superpro bushes, are the a easy job or do they require pressing in? |
|
| Author: | bigrig91 [ Wed Sep 08, 2010 10:48 am ] |
| Post subject: | Re: Rear control arms, (coily) |
Hey mate just did all my arms bushes, they are easy and don't need pressing in but do need to be pressed out because of the steel outer on the standard bushes. About an hour and half job for the back if your bolts aren't rusted in!!! |
|
| Author: | coily96 [ Wed Sep 08, 2010 10:58 am ] |
| Post subject: | Re: Rear control arms, (coily) |
did you use caster correction bushes or standard? |
|
| Author: | bigrig91 [ Wed Sep 08, 2010 11:00 am ] |
| Post subject: | Re: Rear control arms, (coily) |
No castor correction in the back mate. But I just used normal ones in the front they last longer I think. The 2 that attach arm to the diff in the front need to be pressed in!! |
|
| Author: | coily96 [ Wed Sep 08, 2010 11:13 am ] |
| Post subject: | Re: Rear control arms, (coily) |
ok that for that, im just doing the rears for now, might get the ebay caster bushes for $149 |
|
| Author: | bigrig91 [ Wed Sep 08, 2010 11:15 am ] |
| Post subject: | Re: Rear control arms, (coily) |
I bought the eBay kit from the supplier tht has the front, rear and panhard rod bushes! Not bad value I don't think made my car feel a thousand times better! |
|
| Author: | coily96 [ Wed Sep 08, 2010 11:25 am ] |
| Post subject: | Re: Rear control arms, (coily) |
Do they still sell them, would you have the ebay company name? |
|
| Author: | bigrig91 [ Wed Sep 08, 2010 11:32 am ] |
| Post subject: | Re: Rear control arms, (coily) |
Pm sent |
|
| Author: | jonno_racing [ Wed Sep 08, 2010 12:42 pm ] |
| Post subject: | Re: Rear control arms, (coily) |
were all your bushings fucked? i wouldnt mind some rubber ones for my new arms. |
|
| Author: | Fatzook [ Wed Sep 08, 2010 1:26 pm ] |
| Post subject: | Re: Rear control arms, (coily) |
jonno_racing wrote: were all your bushings fucked?
i wouldnt mind some rubber ones for my new arms. Yes. Proper fucked.
|
|
| Author: | bigrig91 [ Wed Sep 08, 2010 11:15 pm ] |
| Post subject: | Re: Rear control arms, (coily) |
Fatzook wrote: jonno_racing wrote: were all your bushings fucked? i wouldnt mind some rubber ones for my new arms. Yes. Proper fucked. what he said! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|