| auszookers.com https://auszookers.com/forum/ |
|
| How is the hard top mounted? https://auszookers.com/forum/viewtopic.php?f=5&t=14967 |
Page 1 of 1 |
| Author: | Glavas [ Wed Sep 08, 2010 1:13 pm ] |
| Post subject: | How is the hard top mounted? |
Just curious as to how a hard top is mounted to sierras? How hard is it to mount a soft top to a factory hard top and vice versa? |
|
| Author: | atari4x4 [ Wed Sep 08, 2010 2:29 pm ] |
| Post subject: | Re: How is the hard top mounted? |
mounting a soft top to a tin top requires a full body swap, unless you just want to drape it over the tin top like a car cover? the fiberglass hard tops have a few different over center latches & clips to hold down the 2 sections. |
|
| Author: | Glavas [ Thu Sep 09, 2010 7:38 am ] |
| Post subject: | Re: How is the hard top mounted? |
By hard top i mean fiberglass. Can you fit a soft top to a sierra which was factory fiberglass roof without mods? or will you need to drill the body for the studs? |
|
| Author: | BlueSuzy [ Thu Sep 09, 2010 1:18 pm ] |
| Post subject: | Re: How is the hard top mounted? |
You will need studs for back tub sides, and front window, special studs for tray door, a Front window channel(if it doesnt have one) and rear softop support bar |
|
| Author: | Fatzook [ Thu Sep 09, 2010 1:29 pm ] |
| Post subject: | Re: How is the hard top mounted? |
BlueSuzy wrote: You will need studs for back tub sides, and front window, special studs for tray door, a Front window channel(if it doesnt have one) and rear softop support bar
And the rope tracks that run down the back of the b-pillar. |
|
| Author: | BlueSuzy [ Thu Sep 09, 2010 1:54 pm ] |
| Post subject: | Re: How is the hard top mounted? |
Ah yes! |
|
| Author: | Glavas [ Thu Sep 09, 2010 2:01 pm ] |
| Post subject: | Re: How is the hard top mounted? |
Damn, so much work just for a soft top. |
|
| Author: | Glavas [ Thu Sep 09, 2010 2:09 pm ] |
| Post subject: | Re: How is the hard top mounted? |
How hard is just the front half of the hard top to a soft top? Hoping to mix that with a fast back soft top? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|