Built4thrashing wrote:
all the hoses go in the bin with the sierra carby attached. Get ya self a corolla carby and you will only have about 3 to worry about.
B4T
B4T
I got a 5k one for sale..
| auszookers.com https://auszookers.com/forum/ |
|
| where do all the hoses goe on the carby https://auszookers.com/forum/viewtopic.php?f=5&t=15266 |
Page 1 of 1 |
| Author: | ozsteve [ Mon Sep 20, 2010 7:18 pm ] |
| Post subject: | where do all the hoses goe on the carby |
hey guys love this site i have a 91 wt soft top great little car but the last owner thrashed it so i am starting from scratch but cant get the motivation to do any thing until i get it running right she runs with a small hiss and stalls ou all the time thought it was carby but have swapped it with another but does the same thing so starting from basics does any 1 have a pic or diagram of where all the vac hoses goe will add phoyos of her soon |
|
| Author: | ozsteve [ Mon Sep 20, 2010 7:34 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
here r some pics |
|
| Author: | ozsteve [ Mon Sep 20, 2010 7:37 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
more |
|
| Author: | ozsteve [ Mon Sep 20, 2010 7:47 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
one more |
|
| Author: | jdk81 [ Mon Sep 20, 2010 10:35 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
I dont want to be a grimbo, so i did some searching for you... http://auszookers.com/index.php?name=Fo ... ic&t=10794 You can also download the drover manual, in the downloads section... grimbo it if you need. |
|
| Author: | Reubs [ Tue Sep 21, 2010 2:35 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
ozsteve wrote: she runs with a small hiss and stalls ou all the time thought it was carby but have swapped it with another
Did you replace any gaskets or notice any worn hoses or openings without a hose when you swapped carbys. Could be an air leak, which would stuff the idle mixture. Get a can of carby cleaner or start-ya-bastard and spray around your hoses and carby while the engine is running. If RPM changes you'll know you have a leak. |
|
| Author: | ozsteve [ Wed Sep 22, 2010 6:46 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
thanks 4 your research jdk81 but i could not realy understand it most proberbly because im new to the mechanical side of things i think ineed a photo a bit ferther away because i have changed gaskets sprayed basterd on it but nuttin so now that i am half bald i think that i might have all the hoses mixed up |
|
| Author: | jdk81 [ Wed Sep 22, 2010 8:20 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
take a pic of your carby and hoses then post it up. Someone may mark it using noobshop and tell you which hoses are wrong. |
|
| Author: | Built4thrashing [ Wed Sep 22, 2010 11:33 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
all the hoses go in the bin with the sierra carby attached. Get ya self a corolla carby and you will only have about 3 to worry about. B4T |
|
| Author: | steak_knife [ Wed Sep 22, 2010 11:34 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
Built4thrashing wrote: all the hoses go in the bin with the sierra carby attached. Get ya self a corolla carby and you will only have about 3 to worry about.
B4T I got a 5k one for sale..
|
|
| Author: | ozsteve [ Wed Sep 22, 2010 12:00 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
how much steak knife |
|
| Author: | steak_knife [ Wed Sep 22, 2010 12:09 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
ozsteve wrote: how much steak knife
can't remember, I'll look in my for sale thread.. 
|
|
| Author: | steak_knife [ Wed Sep 22, 2010 12:09 pm ] |
| Post subject: | Re: where do all the hoses goe on the carby |
http://auszookers.com/index.php?name=Fo ... 42&start=0 Say's $30 in there... 
|
|
| Author: | ozsteve [ Thu Sep 23, 2010 6:56 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
got a photo of another cars carby i had my hoses assabout face running better but still has slight miss atleast it doesnt stall steak knife does that carby fit staight on my engine |
|
| Author: | steak_knife [ Thu Sep 23, 2010 11:13 am ] |
| Post subject: | Re: where do all the hoses goe on the carby |
ozsteve wrote: got a photo of another cars carbyi had my hoses assabout face, running better but still has slight miss atleast it doesnt stall steak knife does that carby fit staight on my engine
Bolt's up to the sierra manifold, but it may need a kit put through it, has manual choke to, so a cable will have to be made fit.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|