auszookers.com
https://auszookers.com/forum/

Vit dif in Sierra Housings
https://auszookers.com/forum/viewtopic.php?f=5&t=15273		 Page 1 of 1
Author:  5ierra [ Mon Sep 20, 2010 10:29 pm ]
Post subject:  Vit dif in Sierra Housings
Just a qucik one.

Transplanting the Vit gears i have into sierra steel housings. Is it only the rear that needs the retaining can or both?

Cheers.
Author:  steak_knife [ Mon Sep 20, 2010 10:36 pm ]
Post subject:  Re: Vit dif in Sierra Housings
joeblow wrote:
want33s wrote:
alex wrote:
:oops: diff gears, or is that later down the track?

Steady on mate I'm not that rich 8O
I have a front Vit alloy diff with a 5.12 gearset just need another one and then buy a pair of retaining cans and I'm set.


why?....you don't need retaining cans.


I've read that some other place..
http://auszookers.com/index.php?name=Fo ... pic&t=5582

Last page..
Author:  5ierra [ Mon Sep 20, 2010 10:51 pm ]
Post subject:  Re: Vit dif in Sierra Housings
That was the thread that raised the question for me. Because i was speaking with someone about it already and from what i gather only the rear required it because it was a different pin set up or soemthign like that??? (I have no real idea whats going on here 8O )
Author:  steak_knife [ Mon Sep 20, 2010 11:01 pm ]
Post subject:  Re: Vit dif in Sierra Housings
Is that the reason for the can's?? to hold the pin's in?? :?

Don't you have a Mig?? :lol:

What hold's em in now?? i cant see the crown wheel moving that much (that's what hold em in) going into a sierra housing that thay need can's..
Author:  5ierra [ Mon Sep 20, 2010 11:09 pm ]
Post subject:  Re: Vit dif in Sierra Housings
My understanding is that, because the crowns are different sizes, when they are put into the sierra housings, the pins simply fall out. haha. So the cans keep them in place.

Also, mig... what is this mig you speak of? Do you mean meg? No body like meg. SHUT UP MEG! Nyaghhhhhhhh! (if you dont watch family guy dont bother trying to understand that)

An no, i dont have a welder.
Author:  steak_knife [ Mon Sep 20, 2010 11:11 pm ]
Post subject:  Re: Vit dif in Sierra Housings
I've used vit center's in sierra's before (front) & thay look the same to me..
Author:  5ierra [ Mon Sep 20, 2010 11:14 pm ]
Post subject:  Re: Vit dif in Sierra Housings
front is the one i didnt think you needed a can for :S

Hahaha, hopefully someone will chime in soon and clear this up for us :)
Author:  steak_knife [ Mon Sep 20, 2010 11:15 pm ]
Post subject:  Re: Vit dif in Sierra Housings
5ierra wrote:
front is the one i didnt think you needed a can for :S

Hahaha, hopefully someone will chime in soon and clear this up for us :)


:roll: I'll shut up then!!! :roll:
Author:  finlay113 [ Mon Sep 20, 2010 11:19 pm ]
Post subject:  Re: Vit dif in Sierra Housings
pretty sure its the fronts that need the reatiners. and the rear vitara centre gears are to big and wont fit

http://www.lowrangeoffroad.com/index.ph ... -cans.html
Author:  royce [ Mon Sep 20, 2010 11:27 pm ]
Post subject:  Re: Vit dif in Sierra Housings
Confusion is awesome

I believe using 5.12 gears on a WT rear or NT 1.3 front or rear a can is needed

WT front never thought about but it might not but I doubt it

not needed with air lockers cause they are clerver and a little bigger
Author:  5ierra [ Mon Sep 20, 2010 11:27 pm ]
Post subject:  Re: Vit dif in Sierra Housings
steak_knife wrote:
5ierra wrote:
front is the one i didnt think you needed a can for :S

Hahaha, hopefully someone will chime in soon and clear this up for us :)


:roll: I'll shut up then!!! :roll:


I didnt mean it like that mate.



Cheers finlay, that might just be the case.
Author:  5ierra [ Mon Sep 20, 2010 11:28 pm ]
Post subject:  Re: Vit dif in Sierra Housings
4.8's would be the same deal right royce?
Author:  royce [ Mon Sep 20, 2010 11:49 pm ]
Post subject:  Re: Vit dif in Sierra Housings
dunno, in theory the crownwheel would be smaller so it might hold it in
Author:  5ierra [ Mon Sep 20, 2010 11:53 pm ]
Post subject:  Re: Vit dif in Sierra Housings
urgh, i'm opening another can of worms now :P anyone on here with 4.8's experience? lol.
Author:  Fatzook [ Tue Sep 21, 2010 12:09 am ]
Post subject:  Re: Vit dif in Sierra Housings
royce wrote:
WT front never thought about but it might not but I doubt it



The can is required for the rear only.

I have 4.6 R&P's in WT diffs. The rear has a can, but the front does not.
Author:  tanshi [ Tue Sep 21, 2010 12:10 am ]
Post subject:  Re: Vit dif in Sierra Housings
i have a 4.8 crown wheel i can maybe measure tonight.

i thought you had 5.1s?
Author:  Fatzook [ Tue Sep 21, 2010 12:20 am ]
Post subject:  Re: Vit dif in Sierra Housings
Nope, 4.6's. And the ID of the crown wheel is the same as 5.12's meaning the can is needed on the rear to stop the pins from falling out.

The vit crown wheels are thinner than sierra which allows the cross pins to potentially fall out. The can is fitted to stop this from happening.
Author:  5ierra [ Tue Sep 21, 2010 12:25 am ]
Post subject:  Re: Vit dif in Sierra Housings
tanshi wrote:
i have a 4.8 crown wheel i can maybe measure tonight.

i thought you had 5.1s?


There is still much debate :( NinjaDaniel says 4.8's others opinions say 5.1's.

I wont have an idea until i pull the diff out and count the teeth i guess. haha

Cheers for that fatty, only need the one can then :D
Author:  tanshi [ Tue Sep 21, 2010 12:29 am ]
Post subject:  Re: Vit dif in Sierra Housings
dont suppose you wanna sell them if they are 4.8s :)
Author:  5ierra [ Tue Sep 21, 2010 12:37 am ]
Post subject:  Re: Vit dif in Sierra Housings
I could be pursueded. I'm at a cross road atm. I want 5.14:1 or 6.5:1's atm. If i do it though then i have to go to 3.9's and also make/buy a cradle... lol.

Will let you know what happens ;) got other things that are more pressing then that atm. :P
Author:  tanshi [ Tue Sep 21, 2010 12:39 am ]
Post subject:  Re: Vit dif in Sierra Housings
you should only need 3.7s if you go to 6.5s and we have heaps of those. dad is just about to swap his 3.7s out for 4.6s so i could swap you those included. no great rush, they will only be for the ute when i do it.
Author:  5ierra [ Tue Sep 21, 2010 12:43 am ]
Post subject:  Re: Vit dif in Sierra Housings
yeh na thats cool man, tcase gears wont be for a while anyways. have to convince myself i really need them first :P

Cheers for your help with the cans everyone!! :D
Author:  Fatzook [ Tue Sep 21, 2010 4:48 am ]
Post subject:  Re: Vit dif in Sierra Housings
I have a spare Can here if you need one....
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/