| auszookers.com https://auszookers.com/forum/ |
|
| need machanical help sunshine coast https://auszookers.com/forum/viewtopic.php?f=5&t=15385 |
Page 1 of 2 |
| Author: | ozsteve [ Sun Sep 26, 2010 5:36 am ] |
| Post subject: | need machanical help sunshine coast |
hey all just wondering if there is somebody on the coast to help me get my 91 sj70 soft top runnin right (please) |
|
| Author: | xedent [ Sun Sep 26, 2010 5:58 am ] |
| Post subject: | Re: need machanical help sunshine coast |
Tell us what the problem is mate. |
|
| Author: | ozsteve [ Sun Sep 26, 2010 6:30 am ] |
| Post subject: | Re: need machanical help sunshine coast |
ive tried every thing from changing carbys to replacing all hoses and she still runs with a slight miss and every now and then it stalls for no reason |
|
| Author: | SuziBlu [ Sun Sep 26, 2010 7:39 am ] |
| Post subject: | Re: need machanical help sunshine coast |
want33s pm him and talk about this, he will sort things out. |
|
| Author: | ozsteve [ Sun Sep 26, 2010 8:06 am ] |
| Post subject: | Re: need machanical help sunshine coast |
i spoke to jas he is betterwith efi he is also the bloke i bought te new carby off |
|
| Author: | lordviper556 [ Sun Sep 26, 2010 8:16 am ] |
| Post subject: | Re: need machanical help sunshine coast |
i know sfa about carbys so i cant help u man. have you checked the dizzy and leads ect? |
|
| Author: | xedent [ Sun Sep 26, 2010 8:21 am ] |
| Post subject: | Re: need machanical help sunshine coast |
fuel pump aswell ? |
|
| Author: | Dale [ Sun Sep 26, 2010 8:52 am ] |
| Post subject: | Re: need machanical help sunshine coast |
Plugs and points, check timing advance too. |
|
| Author: | McBane [ Sun Sep 26, 2010 9:24 am ] |
| Post subject: | Re: need machanical help sunshine coast |
check for shit in the tank i saw a gum nut do the same thing, gets sucked in engine stalls nut floats away to get sucked in again later |
|
| Author: | steak_knife [ Sun Sep 26, 2010 9:26 am ] |
| Post subject: | Re: need machanical help sunshine coast |
Dale wrote: Plugs and points, check timing advance too.
|
|
| Author: | SuziBlu [ Sun Sep 26, 2010 9:45 am ] |
| Post subject: | Re: need machanical help sunshine coast |
steak_knife wrote: Dale wrote: Plugs and points, check timing advance too. |
|
| Author: | SuziBlu [ Sun Sep 26, 2010 9:50 am ] |
| Post subject: | Re: need machanical help sunshine coast |
What is the carby. ? |
|
| Author: | ozsteve [ Sun Sep 26, 2010 10:00 am ] |
| Post subject: | Re: need machanical help sunshine coast |
its a stock carby the only two things i havnt properly checked r the dizzy and fuel pump ,the dizzy does not have points so i dont know how to check lt out , i also havnt checked fuel tank is there an easy way to clean it out is there a drain plug and thank you all for helping me |
|
| Author: | ozsteve [ Sun Sep 26, 2010 10:02 am ] |
| Post subject: | Re: need machanical help sunshine coast |
im thinking about buying steak knifes toyota carby or a webber which is better |
|
| Author: | lordviper556 [ Sun Sep 26, 2010 11:39 am ] |
| Post subject: | Re: need machanical help sunshine coast |
i would check everything else before you buy a another carby, make sure that the carby really is the problem. |
|
| Author: | steak_knife [ Sun Sep 26, 2010 12:01 pm ] |
| Post subject: | Re: need machanical help sunshine coast |
lordviper556 wrote: i would check everything else before you buy a another carby, make sure that the carby really is the problem.
x2.. |
|
| Author: | SuziBlu [ Sun Sep 26, 2010 12:28 pm ] |
| Post subject: | Re: need machanical help sunshine coast |
Sounds to me like its not the carby, you have changed it and no difference. The fuel filter, change it, when its night, real dark, start her up and look at the motor, see if you can see any sparks. Have a good look at the dizzy cap, close look, check the contacts, and also for a crack, may only be super small, but that is all thats needed. Get a can of start ya basted, start her up, spray around the carby, close, if there is a minor vacuum leak, it will suck this in and revs will increase, all around. |
|
| Author: | Makie43 [ Mon Sep 27, 2010 6:05 pm ] |
| Post subject: | Re: need machanical help sunshine coast |
Not sure if this will help, but I had a similar problem with my SJ50. I changed everything related to the ignition, took the tank out and cleaned it, put on new filters etc. and found out eventually that one of the water hose connections to the carby was corroded and had a slight leak, and when it got up to normal working temp. it would stall and miss! I fixed that and solved the problem ..... |
|
| Author: | ozsteve [ Tue Oct 05, 2010 8:10 am ] |
| Post subject: | Re: need machanical help sunshine coast |
OK IVE TRIED EVERY THING NOW ITS ALSO COUGHING AND SPUTURRING LIKE A BITCH AND JERKING LIKE AN 18 YR OLD WATCHING PORN I NOW THINK ITS TIME TO FIND A MACHANIC ANYONE KNOW A GOOD MECH ON THE COAST WHO KNOWS ABOUT SUZUKIS |
|
| Author: | zooky08 [ Tue Oct 05, 2010 8:26 am ] |
| Post subject: | Re: need machanical help sunshine coast |
have you checked if the head gasket or carby gasket have any air leaks |
|
| Author: | ozsteve [ Tue Oct 05, 2010 8:30 am ] |
| Post subject: | Re: need machanical help sunshine coast |
head gasket no how hard is it to change engines i have the chance to buy a barina engine cheap |
|
| Author: | zooky08 [ Tue Oct 05, 2010 8:45 am ] |
| Post subject: | Re: need machanical help sunshine coast |
ozsteve wrote: head gasket no how hard is it to change engines i have the chance to buy a barina engine cheap
dont know much but im guessing new engine mouts and and barina is front wheel drive so i dont know if a sierra box will fit to a barina engine |
|
| Author: | want33s [ Tue Oct 05, 2010 9:36 am ] |
| Post subject: | Re: need machanical help sunshine coast |
Barina is G13 but you'll have to swap sump and pickup, engine mounts, manifolds and possibly pulleys if it doesn't come with an alternator. |
|
| Author: | Zook_Fan [ Tue Oct 05, 2010 9:44 am ] |
| Post subject: | Re: need machanical help sunshine coast |
for my barina swap i had to change the following: sump and oil pickup inlet and exhaust manifolds alternator bracket alternator pulley (also had to make a spacer for the pulley) water pump fuel pump cam distributor engine mounts Also a rocker but that is because i broke one... The swap wasn't too hard, took a day to get the barina engine out, my engine out, swap the stuff over and get the barina engine in my car. Took another day to get it all going and tuning and stuff though. |
|
| Author: | ozsteve [ Tue Oct 05, 2010 9:50 am ] |
| Post subject: | Re: need machanical help sunshine coast |
might wait 4 a vitara or sierra motor might b easier |
|
| Author: | Zook_Fan [ Tue Oct 05, 2010 9:54 am ] |
| Post subject: | Re: need machanical help sunshine coast |
to each their own but I paid $160 for a full barina motor that only had 57000k's on the clock and now the wreckers are even cheaper... |
|
| Author: | Ben_Sierra [ Tue Oct 05, 2010 9:56 am ] |
| Post subject: | Re: need machanical help sunshine coast |
Get a mechanic to have a look at it... Doesn't have to be a zook specialist, just any mechanic... Its probably something fairly simple... |
|
| Author: | ozsteve [ Tue Oct 05, 2010 10:39 am ] |
| Post subject: | Re: need machanical help sunshine coast |
thanks guys |
|
| Author: | Blueberry [ Wed Oct 06, 2010 4:06 am ] |
| Post subject: | Re: need machanical help sunshine coast |
where abouts on the coast are you? |
|
| Author: | ozsteve [ Wed Oct 06, 2010 5:39 am ] |
| Post subject: | Re: need machanical help sunshine coast |
wurtulla |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|