auszookers.com
https://auszookers.com/forum/

How do you remove these little suckers.
https://auszookers.com/forum/viewtopic.php?f=5&t=15407		 Page 1 of 1
Author:  DMAC [ Mon Sep 27, 2010 6:37 am ]
Post subject:  How do you remove these little suckers.
Is their an easy way to remove these little plastic thingys so I can fully strip the door?

Image

Image

Don't know why but I'm struggling with something that should be simple. :cry:
Author:  Scrawny [ Mon Sep 27, 2010 6:46 am ]
Post subject:  Re: How do you remove these little suckers.
The lock one unclips from the rod then the rod can be pulled out. The other one may not come apart in one piece, can you disconnect it somewhere else?
Author:  alien [ Mon Sep 27, 2010 7:17 am ]
Post subject:  Re: How do you remove these little suckers.
when i replaced my door handle i used needlenose pliers to destroy it to get it off... while trying to destroy it though it somehow pulled through unharmed! haha
Author:  steak_knife [ Mon Sep 27, 2010 7:36 am ]
Post subject:  Re: How do you remove these little suckers.
alien wrote:
when i replaced my door handle i used needlenose pliers to destroy it to get it off... while trying to destroy it though it somehow pulled through unharmed! haha


Yep that sound's about right.. :lol:
Author:  want33s [ Mon Sep 27, 2010 7:48 am ]
Post subject:  Re: How do you remove these little suckers.
Dave for the first pic... Stick a large flat blade screwdriver between the black plastic and the rod and twist it. The rod will pull out of the red bit.

The second one you use a small flat blade and open the green clip and then pull the rod out of it.
Author:  DMAC [ Mon Sep 27, 2010 8:07 pm ]
Post subject:  Re: How do you remove these little suckers.
Thanks guys i was going about it the wrong way.
Frustrating sometimes when you know it should be simple but just not happening. :oops:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/