| auszookers.com https://auszookers.com/forum/ |
|
| Transfer case 6.5s mods https://auszookers.com/forum/viewtopic.php?f=5&t=15465 |
Page 1 of 1 |
| Author: | maloo11 [ Tue Sep 28, 2010 11:21 am ] |
| Post subject: | Transfer case 6.5s mods |
What will i need for my transfer case and mounts when adding 6.5s? I will be getting a roctoy ring, do i need strenghtened mounts or any other add on?. Only running stock 1.3, will have mini spool in shortly, on 31s. |
|
| Author: | 93zook [ Tue Sep 28, 2010 11:35 am ] |
| Post subject: | Re: Transfer case 6.5s mods |
rocktoy ring should be all with only 31's but depends how hard you drive, ive got no bracing or anything on 33s and haven't done any damage...yet |
|
| Author: | appsie [ Tue Sep 28, 2010 12:04 pm ] |
| Post subject: | Re: Transfer case 6.5s mods |
i have a roctoy ring with a few flatbar gussets back to the standard mounts.i also have some strengthening on my standard mounts,i have a piece of 6mm flat welded on the single mount to try stop it bending,and some gussets on the long arm along it,filling across the angle to stop it twisting like i have seen many do. i run 6.5s,31s,rear locked for 2 n a half years and now front for 2 trips havent had any damage so far thank god,not even a torn standard rubber mount.also have 65x35rhs to lift the case |
|
| Author: | maloo11 [ Tue Sep 28, 2010 8:51 pm ] |
| Post subject: | Re: Transfer case 6.5s mods |
Is this http://locktup4x4.com.au/index.php?main ... ge&pID=392 any good? |
|
| Author: | Ben_Sierra [ Wed Sep 29, 2010 12:25 am ] |
| Post subject: | Re: Transfer case 6.5s mods |
maloo11 wrote: Is this http://locktup4x4.com.au/index.php?main ... ge&pID=392 any good?
Personally I think running standard rubber mounts is best, on the basis that if there is gonna be a weak point I'd rather it be a cheap mount than the case... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|