auszookers.com
https://auszookers.com/forum/

pinch puncture
https://auszookers.com/forum/viewtopic.php?f=5&t=15608		 Page 1 of 1
Author:  Lhyriel [ Mon Oct 04, 2010 9:02 am ]
Post subject:  pinch puncture
what is the best and fastest way to find a small puncture? takes 4 days to deflate from 30-0psi
Author:  alien [ Mon Oct 04, 2010 9:06 am ]
Post subject:  Re: pinch puncture
take the wheel off and throw it in someones pool =P

ORRRRRR 50/50 mix of detergent and water, and slowly brush it around the valve stem, valve, and bead on both sides... if you dont see any bubbles blowing then slowly work your way around the sidewall then the tread.
Author:  steak_knife [ Mon Oct 04, 2010 9:09 am ]
Post subject:  Re: pinch puncture
alien wrote:
take the wheel off and throw it in someones pool =P

ORRRRRR 50/50 mix of detergent and water, and slowly brush it around the valve stem, valve, and bead on both sides... if you dont see any bubbles blowing then slowly work your way around the sidewall then the tread.


Is the most common....if it is that, just let all the air out & spray silicone spray in between the rim & the bead, save's stripping the tyre..
Author:  Lhyriel [ Mon Oct 04, 2010 9:59 am ]
Post subject:  Re: pinch puncture
thanks heaps much appreciated!
Author:  stockman [ Mon Oct 04, 2010 10:06 am ]
Post subject:  Re: pinch puncture
Check your valve first.
Author:  BlueSuzy [ Mon Oct 04, 2010 10:54 pm ]
Post subject:  Re: pinch puncture
Or take to a shop. $20 well spent.
Author:  alien [ Tue Oct 05, 2010 5:05 am ]
Post subject:  Re: pinch puncture
orrrrrr....

i dunno i just wanted to write or again.
Author:  steak_knife [ Tue Oct 05, 2010 5:26 am ]
Post subject:  Re: pinch puncture
BlueSuzy wrote:
Or take to a shop. $20 well spent.


Pet shop?? :P
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/