BlueSuzy wrote:
40mm and a possible bodylift will do for most sierra's.
works well for my coily
| auszookers.com https://auszookers.com/forum/ |
|
| 1996 Sierra Coily Suspension Help https://auszookers.com/forum/viewtopic.php?f=5&t=15621 |
Page 1 of 1 |
| Author: | danw [ Mon Oct 04, 2010 11:04 pm ] |
| Post subject: | 1996 Sierra Coily Suspension Help |
http://www.puresuzuki.com/3_lift_kit.htm gday guys. Was just looking at lifting up the stock 96 i have. struggled to find anything bigger then 40mm, so was looking at the calmin 3" lift, does anyone know much about the calmini 3"lift kit?? will it go onto a 96 sierra?? not sure if specs are the same for the american versions?? does anyone in australia bring these in?? thanks |
|
| Author: | Fatzook [ Mon Oct 04, 2010 11:05 pm ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
No mate, thats for a Vitara. |
|
| Author: | Fatzook [ Mon Oct 04, 2010 11:07 pm ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
actually, I should have asked, Why do you need mor ethan 40mm lift? Are you trying to clear large tyres? |
|
| Author: | BlueSuzy [ Mon Oct 04, 2010 11:29 pm ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
40mm and a possible bodylift will do for most sierra's. |
|
| Author: | Rusho [ Mon Oct 04, 2010 11:45 pm ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
BlueSuzy wrote: 40mm and a possible bodylift will do for most sierra's.
works well for my coily
|
|
| Author: | Reubs [ Tue Oct 05, 2010 12:45 am ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
Doesn't Suspension Stuff at Springwood sell a 60mm and 80mm lift kit? 40mm spring and a 50mm body lift will 'just' work for 31" tyres. 50-60mm would be better IMO. |
|
| Author: | danw [ Tue Oct 05, 2010 1:52 am ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
40 mm isnt even 2" thats all. I wasnt sure. just looking into stuff atm. still not sure what i want to do. eems there is not alot available for the coilys. I spoke to a guy from dobinson, he said he can do any size spring i want, but cant match anything in the way of front strut for these. |
|
| Author: | jonno_racing [ Tue Oct 05, 2010 2:13 am ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
i have 2inch bl 40 coils and 35mm spacers and 31s clear easy mate |
|
| Author: | ZookiMonsta [ Tue Oct 05, 2010 4:37 am ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
Lift is over-rated.
|
|
| Author: | BlueSuzy [ Tue Oct 05, 2010 12:48 pm ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
40mm is 10.8mm short of 2". Whoopdy doo! I run 33's on 3" lift. |
|
| Author: | got_bar_work [ Tue Oct 05, 2010 5:35 pm ] |
| Post subject: | Re: 1996 Sierra Coily Suspension Help |
I had 30 mm and gard chop and cleared 31 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|