| auszookers.com https://auszookers.com/forum/ |
|
| GM sealer? cracked block https://auszookers.com/forum/viewtopic.php?f=5&t=15625 |
Page 1 of 1 |
| Author: | spuki [ Tue Oct 05, 2010 3:35 am ] |
| Post subject: | GM sealer? cracked block |
hey guys, took the head off the zook to replace the headgasket and to find a crack in the block between 2nd and 3rd cylinder, have spoken to 2 mechanics both say where the crack is shudnt be much of a problem but 1 has told me to use GM sealer on both sides of the new head gasket as it is apparently top stuff then run chemiweld through the radiator, the other said dont use GM sealer because it will probably react to the glue already on the gasket. This will still only be a temp fix just to run me to a few job interviews over the nxt couple of months, then il replace the whole engine, just wanted to hear some thoughts from guys on here on what i should do. cheers in advance |
|
| Author: | Rusho [ Tue Oct 05, 2010 3:45 am ] |
| Post subject: | Re: GM sealer? cracked block |
Just look around for a cheap bottom end. I wouldn't be too surprised if someone has one lying around that they are wanting to get rid of. |
|
| Author: | ck13488 [ Tue Oct 05, 2010 3:53 am ] |
| Post subject: | Re: GM sealer? cracked block |
Rusho wrote: Just look around for a cheap bottom end. I wouldn't be too surprised if someone has one lying around that they are wanting to get rid of.
i have one for you $50 |
|
| Author: | Rusho [ Tue Oct 05, 2010 4:04 am ] |
| Post subject: | Re: GM sealer? cracked block |
ck13488 wrote: Rusho wrote: Just look around for a cheap bottom end. I wouldn't be too surprised if someone has one lying around that they are wanting to get rid of. i have one for you $50 Almost as cheap as a bottle of shit that is as useful as a cock flavoured lollipop 
|
|
| Author: | boostedbrick [ Tue Oct 05, 2010 4:41 am ] |
| Post subject: | Re: GM sealer? cracked block |
Ive got a whole engine for $50... needs rebuild but should have a good ass end.. not that far to drive 
|
|
| Author: | ck13488 [ Tue Oct 05, 2010 4:44 am ] |
| Post subject: | Re: GM sealer? cracked block |
20mins vs 12 hours... |
|
| Author: | spuki [ Tue Oct 05, 2010 4:58 am ] |
| Post subject: | Re: GM sealer? cracked block |
might have found a complete engine guys, but ck that block you have is that complete, pistons, crank etc or just the block on its own? |
|
| Author: | ck13488 [ Tue Oct 05, 2010 5:05 am ] |
| Post subject: | Re: GM sealer? cracked block |
block with pistons, crank etc. engine mounts are broken. no starter. it came out of a 95 sierra i parted and i was told the rings had gone in it |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|