| auszookers.com https://auszookers.com/forum/ |
|
| best lift for sj40 https://auszookers.com/forum/viewtopic.php?f=5&t=15679 |
Page 1 of 1 |
| Author: | PORL [ Wed Oct 06, 2010 9:08 am ] |
| Post subject: | best lift for sj40 |
Hi all, just looking for some info from people that have raised there sierra. whats a good lift kit? im looking for an inch and a half or 2 inches, still deciding what will be best, going to put some 30s on it maybe bigger, what options do i have? i would prefer not to body lift, although im not completely against it. what problems will i face with lifting? thank you all paul |
|
| Author: | joeblow [ Wed Oct 06, 2010 9:10 am ] |
| Post subject: | Re: best lift for sj40 |
http://www.auszookers.com/index.php?nam ... ile=search |
|
| Author: | 31zook [ Wed Oct 06, 2010 9:17 am ] |
| Post subject: | Re: best lift for sj40 |
now thats just mean joe..... |
|
| Author: | PORL [ Wed Oct 06, 2010 9:23 am ] |
| Post subject: | Re: best lift for sj40 |
lol i had a search, or 4, so many end in arguments and im yet to find a thread that answers my questions, im still looking anyway, but if you dont want to answer there no need to be a smart ass, just close my post and move on, cheers joe |
|
| Author: | Ben_Sierra [ Wed Oct 06, 2010 9:23 am ] |
| Post subject: | Re: best lift for sj40 |
PORL wrote: Hi all,
just looking for some info from people that have raised there sierra. whats a good lift kit? im looking for an inch and a half or 2 inches, still deciding what will be best, going to put some 30s on it maybe bigger, what options do i have? i would prefer not to body lift, although im not completely against it. what problems will i face with lifting? thank you all paul Spring lift alone does not allow bigger tyres. At all. |
|
| Author: | PORL [ Wed Oct 06, 2010 9:33 am ] |
| Post subject: | Re: best lift for sj40 |
i dont see how, |
|
| Author: | Ben_Sierra [ Wed Oct 06, 2010 9:34 am ] |
| Post subject: | Re: best lift for sj40 |
Because the diff can still move up just as far as it did before when the spring is fully compressed upwards, and the tyres will be all over the inside of the guards.... |
|
| Author: | PORL [ Wed Oct 06, 2010 9:43 am ] |
| Post subject: | Re: best lift for sj40 |
ahh ok. im getting it |
|
| Author: | Ben_Sierra [ Wed Oct 06, 2010 9:48 am ] |
| Post subject: | Re: best lift for sj40 |
You can extend the bumpstops which will sacrafice up-travel for the sake of larger tyres (and allow you to run a longer shock, increasing down-travel). 29's will squeeze in with a bit of guard hammering and bumper mods to a Sierra without body lift or bumpstop mods. Otherwise a 2" body lift will give you plenty of tyre clearance for 30s or bigger... |
|
| Author: | royce [ Wed Oct 06, 2010 9:49 am ] |
| Post subject: | Re: best lift for sj40 |
235's will still fit easy with no body lift and most 30's as well the threads all end up to shit cause there is no answer and nobody can accept that what works for them isnt always the answer for somebody else lots cant accept that a lot of internet folklore is a waste of time as well 
OME springs get a good wrap off the shelf, I liked the kings I had in mine with a leaf removed all round, lots of people say a lot about some brands being stiff, but they can all be tweaked to work well |
|
| Author: | Ben_Sierra [ Wed Oct 06, 2010 9:52 am ] |
| Post subject: | Re: best lift for sj40 |
235's will fit but will need some grinder work on the bumper (and maybe a bit of seam hammering)... Most 30s are barely bigger than the 235s so same sorta thing applies... But: Quote: 30s on it maybe bigger
Bigger wont. |
|
| Author: | PORL [ Wed Oct 06, 2010 9:59 am ] |
| Post subject: | Re: best lift for sj40 |
ok so for a mild lift ome 40mm spring, and a small body lift will fit 30s and not complain to much? |
|
| Author: | royce [ Wed Oct 06, 2010 10:02 am ] |
| Post subject: | Re: best lift for sj40 |
you wont need the bodylift, just cut the front tube off the chassis in front of the wheel and hammer the rear seam in the front wheel arch a bit and enjoy life How many brands still do a 30x9.5 anyway? most will be 235 only now |
|
| Author: | Ben_Sierra [ Wed Oct 06, 2010 10:03 am ] |
| Post subject: | Re: best lift for sj40 |
Yep, do dramas. If you have a stock front bumper you will need to cut it down a bit though... One inch body lift would be enough to clear 30s without any dramas at all, and you'd probably get away without any (depending on the tyre you go with) with a bit of hammer work in the guards... |
|
| Author: | Ben_Sierra [ Wed Oct 06, 2010 10:04 am ] |
| Post subject: | Re: best lift for sj40 |
royce wrote: you wont need the bodylift, just cut the front tube off the chassis in front of the wheel and hammer the rear seam in the front wheel arch a bit and enjoy life
How many brands still do a 30x9.5 anyway? most will be 235 only now I know that BFGs, Wrangler MTRs and Bighorns all come in a 30x9.50 as well as a 235... Makes no sense as they are almost identical 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|