| auszookers.com https://auszookers.com/forum/ |
|
| Stock Engine/Wheel Size https://auszookers.com/forum/viewtopic.php?f=5&t=15693 |
Page 1 of 1 |
| Author: | IN2DEP [ Thu Oct 07, 2010 8:11 am ] |
| Post subject: | Stock Engine/Wheel Size |
Hey guys Just want to know how does everyones sierras drive with bigger wheels on with a stock engine ?? My sierra is pretty slow and doesnt have much torque and that with 27" tyres, but ill be getting 31" soon so just want to know how other zooks cope with 31"s on ?? Cheers guys 
|
|
| Author: | inbits [ Thu Oct 07, 2010 8:30 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
definitely invest in some transfer case reduction gears they are worth every cent. inbits |
|
| Author: | shep [ Thu Oct 07, 2010 8:47 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
mine goes hard. 1.3 and 31s tows a trailer no worries. 
|
|
| Author: | Ben_Sierra [ Thu Oct 07, 2010 8:58 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
shep wrote: mine goes hard. 1.3 and 31s
tows a trailer no worries. And 6.5 gears? |
|
| Author: | IN2DEP [ Thu Oct 07, 2010 9:31 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
but with the gears in the t-case that means it will only work in 4wd, i was more thinking of road use with the big tyres and stock motor There must be something wrong with my motor then, i have to be flat down on the pedal just to keep it at 90ks on the free way is that normal for sierras ?? |
|
| Author: | shep [ Thu Oct 07, 2010 9:34 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
sierra transfer gears also work in 2WD mine lower highrange 2 or 4WD by 20% and low range by 180ish% |
|
| Author: | xedent [ Thu Oct 07, 2010 9:47 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
What are the 6.5's like at 100klms does it scream ? |
|
| Author: | maloo11 [ Thu Oct 07, 2010 9:55 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
I run 31s with stock motor and gearing.......absolutly terrible!! 6.5s are in the mail. You will be sick of the bigger tyres in a months time. My advice is gearing, then if you want more power do the 1.6 vit motor. |
|
| Author: | Ben_Sierra [ Thu Oct 07, 2010 10:01 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
31s with stock gearing means shitty driving and a very short lived clutch... Gears are the only way. |
|
| Author: | mcwilly [ Thu Oct 07, 2010 10:33 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
I had 31s wid 6.5s and drives nicely |
|
| Author: | Fatzook [ Thu Oct 07, 2010 10:40 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
I'll have 33's with 1L transfer and 4.6 R&P. Should be almost stock gearing. And the 1.6 gives me some extra grunt 
|
|
| Author: | shep [ Thu Oct 07, 2010 10:46 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
xedent wrote: What are the 6.5's like at 100klms does it scream ?
about 3600rpm at 100kph. i would like 4000rpm at 100kph.
|
|
| Author: | Fatzook [ Thu Oct 07, 2010 10:51 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
shep wrote: xedent wrote: What are the 6.5's like at 100klms does it scream ? about 3600rpm at 100kph. i would like 4000rpm at 100kph. Thats good!! Mine sits at 4500 on 29's at the moment 
|
|
| Author: | IN2DEP [ Thu Oct 07, 2010 10:30 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
hmmmmm so t-case gears is almost a must and a 1.6 aswell, thanks guys oh does someone know the wieght diff in 31s to 27s or stock 205s cheers |
|
| Author: | maloo11 [ Fri Oct 08, 2010 2:13 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
31s weigh about 18-20 kg each. 27s would be about 12kg i think. |
|
| Author: | Ben_Sierra [ Fri Oct 08, 2010 2:19 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
IN2DEP wrote: hmmmmm so t-case gears is almost a must and a 1.6 aswell, thanks guys
oh does someone know the wieght diff in 31s to 27s or stock 205s cheers 1.6 isn't really a must but gearing definitely is... |
|
| Author: | whincup [ Fri Oct 08, 2010 4:27 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
Fatzook wrote: shep wrote: xedent wrote: What are the 6.5's like at 100klms does it scream ? about 3600rpm at 100kph. i would like 4000rpm at 100kph. Thats good!! Mine sits at 4500 on 29's at the moment wow... mine sits on 3500 on 28's... stock gearing though, and mines a later model that uses the 3.7 ratio in the diff |
|
| Author: | zooky08 [ Fri Oct 08, 2010 5:19 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
mine sits between 3500 to 4000rppm at 120kph with 29's
|
|
| Author: | IN2DEP [ Sun Oct 10, 2010 8:08 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
zooky08 wrote: mine sits between 3500 to 4000rppm at 120kph with 29's
Mine doesnt even get to 110  lol
|
|
| Author: | Ben_Sierra [ Sun Oct 10, 2010 8:10 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
You can't get 110 on 27s with stock gearing? Maybe you need to figure out whats wrong with your car... A good tune up is in order. |
|
| Author: | zooky08 [ Sun Oct 10, 2010 1:36 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
IN2DEP wrote: zooky08 wrote: mine sits between 3500 to 4000rppm at 120kph with 29's Mine doesnt even get to 110 lolmines 1.6 though 
|
|
| Author: | Ben_Sierra [ Sun Oct 10, 2010 1:39 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
You don't need a 1.6 to do 110... |
|
| Author: | zooky08 [ Sun Oct 10, 2010 1:40 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
a well tuned 1.3 will get you more then 110 |
|
| Author: | Ben_Sierra [ Sun Oct 10, 2010 1:47 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
Exactly |
|
| Author: | dm90 [ Sun Oct 10, 2010 2:15 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
shep wrote: xedent wrote: What are the 6.5's like at 100klms does it scream ? about 3600rpm at 100kph. i would like 4000rpm at 100kph. you need a jimny then.
|
|
| Author: | dm90 [ Sun Oct 10, 2010 2:17 pm ] |
| Post subject: | Re: Stock Engine/Wheel Size |
IN2DEP wrote: zooky08 wrote: mine sits between 3500 to 4000rppm at 120kph with 29's Mine doesnt even get to 110 loli had a similar problem with the jimny a while back, couldnt go past about 90km/h, and the revs wouldnt go past about 3950 rpm. put in some injector cleaner and premium fuel and it solved that problem. dont listen to me, i dont know much, seriously, but just a suggestion. but i agree with the others, you should find out whats wrong with your car first before you play with the gearing. |
|
| Author: | IN2DEP [ Mon Oct 11, 2010 7:35 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
Ben_Sierra wrote: You can't get 110 on 27s with stock gearing?
Maybe you need to figure out whats wrong with your car... A good tune up is in order. been there done that lol, engine runs smooth but the mechanic said the carby is bugged, and im not spending money on this if im get the 1.6 droped in, but its still slow
|
|
| Author: | Rockhopper [ Mon Oct 11, 2010 9:09 am ] |
| Post subject: | Re: Stock Engine/Wheel Size |
Stock as A rock 1.3 with 6.5 transfers gets mine to 100 kmh at 3500 rpm and 110 kmh at around 4000 rpm. Top speed on a flat road is 130 kmh |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|