| auszookers.com https://auszookers.com/forum/ |
|
| 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING SPACE https://auszookers.com/forum/viewtopic.php?f=5&t=1573 |
Page 1 of 1 |
| Author: | BlairKerr [ Thu Dec 13, 2007 6:58 pm ] |
| Post subject: | 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING SPACE |
I have just purchased a 91' Suzuki Vitara and want to lift it urgently!! Would I Be able to fit TWO Inch Lift Springs (King springs) with Spring Spacers without causing any problems??? Urgent replies would be appreicated!!! Thanks |
|
| Author: | royce [ Thu Dec 13, 2007 7:29 pm ] |
| Post subject: | Re: 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING S |
yes you can, you can shove 6" of spacer into it if you want BUT it will throw the front end out, severly limit your suspension travel and make CV's easier to break over 2" you will need camber pins to get your wheel alingment back, over 3" you really shoudl look at teh calmini arms and drop brackets |
|
| Author: | BlairKerr [ Thu Dec 13, 2007 8:22 pm ] |
| Post subject: | Re: 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING S |
Ill be using 40 mm springs 30 mm spring spacers in rear 15 mm in front! Where do u get the camber pins from mate??? |
|
| Author: | royce [ Thu Dec 13, 2007 8:54 pm ] |
| Post subject: | Re: 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING S |
pedders is pretty good for them |
|
| Author: | Bruce [ Thu Dec 13, 2007 9:17 pm ] |
| Post subject: | Re: 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING S |
BlairKerr wrote: Ill be using 40 mm springs 30 mm spring spacers in rear 15 mm in front!
Where do u get the camber pins from mate??? And where are you getting the spacers from????? Hint look at the bottom of my sign |
|
| Author: | BlairKerr [ Thu Dec 13, 2007 9:23 pm ] |
| Post subject: | Re: 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING S |
How much mate?? Live in perth! |
|
| Author: | Bruce [ Fri Dec 14, 2007 12:07 am ] |
| Post subject: | Re: 91'SuzukiVitara TWO INCH LIFT SPRINGS WITH SPRING S |
PM BlairKerr |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|