hey i have a g16a bolted to a 1.3 gearbox with adapter plate
i havea a 1.3 starter motor as i didnt have time to fine a 1.6 starter motor
can ny one tell me or show me were you have to grind for it to fit.
heres a pic
much appreciated
Aaron
| auszookers.com https://auszookers.com/forum/ |
|
| what part to grind https://auszookers.com/forum/viewtopic.php?f=5&t=15791 |
Page 1 of 1 |
| Author: | zooky08 [ Mon Oct 11, 2010 7:46 am ] |
| Post subject: | what part to grind |
hey i have a g16a bolted to a 1.3 gearbox with adapter plate i havea a 1.3 starter motor as i didnt have time to fine a 1.6 starter motor can ny one tell me or show me were you have to grind for it to fit. heres a pic
much appreciated Aaron |
|
| Author: | xedent [ Mon Oct 11, 2010 7:49 am ] |
| Post subject: | Re: what part to grind |
I would personally grind the starter rather then the block. |
|
| Author: | zooktastic [ Mon Oct 11, 2010 7:50 am ] |
| Post subject: | Re: what part to grind |
x2 grind the starter motor's housing, did it on mine and works fine 
|
|
| Author: | zooky08 [ Mon Oct 11, 2010 8:01 am ] |
| Post subject: | Re: what part to grind |
where on the starter do you grind nd how much do you grind off Aaron |
|
| Author: | CairnsZook [ Mon Oct 11, 2010 8:13 am ] |
| Post subject: | Re: what part to grind |
Push the starter motor into position. Rub it up and down against the engine block. You should be able to see where it has contacted. Start grinding... I have to pull mine out again and grind off some more. It's making a pretty awful noise as the starter disengages 
|
|
| Author: | hooki [ Mon Oct 11, 2010 8:14 am ] |
| Post subject: | Re: what part to grind |
you grind the face of the starter that contacts the block. Do a little bit at a time with a flappa disc and check fitment every few passes with the grinder. Just make sure the starter sits in position properly. |
|
| Author: | Bruce [ Mon Oct 11, 2010 8:14 am ] |
| Post subject: | Re: what part to grind |
Stick starter on, see where it's hitting (rubbing) grind a bit, check it, grind more till all is good. There is no set measurement to take off because I'm guessing no-one would know, It's all suck and see. |
|
| Author: | Bruce [ Mon Oct 11, 2010 8:15 am ] |
| Post subject: | Re: what part to grind |
Bwhahahah 3 posts in about 1 min all saying the same thing.
|
|
| Author: | CairnsZook [ Mon Oct 11, 2010 8:16 am ] |
| Post subject: | Re: what part to grind |
I hope we're not all wrong 
|
|
| Author: | Bruce [ Mon Oct 11, 2010 8:16 am ] |
| Post subject: | Re: what part to grind |
LOL |
|
| Author: | Bruce [ Mon Oct 11, 2010 8:17 am ] |
| Post subject: | Re: what part to grind |
If only I could type faster I would have won.
|
|
| Author: | zooky08 [ Mon Oct 11, 2010 8:24 am ] |
| Post subject: | Re: what part to grind |
ok thanks guys ill wll try it tomorrow. hope you's are right 
|
|
| Author: | Bruce [ Mon Oct 11, 2010 8:46 am ] |
| Post subject: | Re: what part to grind |
If it all goes to shit I'll delete my posts and blame all the others. LOL |
|
| Author: | zooky08 [ Mon Oct 11, 2010 8:56 am ] |
| Post subject: | Re: what part to grind |
Bruce wrote: If it all goes to shit I'll delete my posts and blame all the others. LOL 
|
|
| Author: | absazooky-sierra [ Mon Oct 11, 2010 9:23 am ] |
| Post subject: | Re: what part to grind |
your a beast how'd you go |
|
| Author: | zooky08 [ Mon Oct 11, 2010 9:31 am ] |
| Post subject: | Re: what part to grind |
umm shit wasnt sitting straight so i got to do some grinding 
|
|
| Author: | mrw82 [ Mon Oct 11, 2010 10:32 am ] |
| Post subject: | Re: what part to grind |
Bruce wrote: If only I could type faster I would have won.
you were lucky to be the sperm to win the race to the egg all those years ago..... I wouldn't get high hopes of ever winning anything else bruce!!! 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|