| auszookers.com https://auszookers.com/forum/ |
|
| Hilux Diff Conversion Lowrange https://auszookers.com/forum/viewtopic.php?f=5&t=15801 |
Page 1 of 1 |
| Author: | jaczook [ Mon Oct 11, 2010 9:16 am ] |
| Post subject: | Hilux Diff Conversion Lowrange |
Hi all Was looking at lowrange website gathering a list of stuff to buy because I dont think you will get a better time to buy now while the Aussie Dollar is strong, and came across High Steer kit for Hilux Diff conversion on a sierra $399. My question is does anyone have this kit? Is it any good in terms of ease of instalation? Or does someone have a better or cheaper option of doing this? http://www.lowrangeoffroad.com/suzuki/s ... r-kit.html Have seen a few guys on here doing this but never paided much attention thanks ahead |
|
| Author: | Fatzook [ Mon Oct 11, 2010 10:46 am ] |
| Post subject: | Re: Hilux Diff Conversion Lowrange |
jaczook wrote: Hi all
Was looking at lowrange website gathering a list of stuff to buy because I dont think you will get a better time to buy now while the Aussie Dollar is strong, and came across High Steer kit for Hilux Diff conversion on a sierra $399. My question is does anyone have this kit? Is it any good in terms of ease of instalation? Or does someone have a better or cheaper option of doing this? http://www.lowrangeoffroad.com/suzuki/s ... r-kit.html Have seen a few guys on here doing this but never paided much attention thanks ahead Its a good kit, but shipping on this item is quite expensive (+$200) so factor that into your budget. |
|
| Author: | deadzook [ Mon Oct 11, 2010 11:28 am ] |
| Post subject: | Re: Hilux Diff Conversion Lowrange |
the hi steer wont work. Lhd and rhd hi steer arms have a different tapper - they do bolt on in rhd configuation but the draglink and tire rod will be the wrong length because of the difference in tapper. and your wheels will rub on the arms unless you have a fair amount of offset. |
|
| Author: | jaczook [ Mon Oct 11, 2010 6:34 pm ] |
| Post subject: | Re: Hilux Diff Conversion Lowrange |
Yea I will ask if they do a righthand setup. I think it would be the saest bet, I have seen a few homemade setups on here and think its best to do it right the first time. |
|
| Author: | Red89 [ Tue Oct 12, 2010 9:51 am ] |
| Post subject: | Re: Hilux Diff Conversion Lowrange |
Locktup do RHD toyota arms, you will need to fab up a tie rod and drag link though.. http://locktup4x4.com.au/hilux-solid-fr ... s-192.html |
|
| Author: | Ridge [ Wed Oct 13, 2010 6:56 am ] |
| Post subject: | Re: Hilux Diff Conversion Lowrange |
im using the low range kit, it does come in RHD. Get some weld in bungs and the fj80 tie rod ends, and make your own tie rod and drag link. |
|
| Author: | zookernator [ Thu Oct 14, 2010 10:18 am ] |
| Post subject: | Re: Hilux Diff Conversion Lowrange |
Im using that exact one mate.. bloody tough bit of gear!! Just have to tell him its for a RHD vehicle!! To save with the shipping though, he didnt send the steel piping. I sourced that locally - which ended up saving me heaps  Just needed someone to weld the tie rods in...
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|