just pull the back out of the ignition barrel and use a screwdriver.
| auszookers.com https://auszookers.com/forum/ |
|
| need help hot wiring https://auszookers.com/forum/viewtopic.php?f=5&t=15826 |
Page 1 of 1 |
| Author: | spuki [ Tue Oct 12, 2010 5:52 am ] |
| Post subject: | need help hot wiring |
ohk so theres the 4 wires to the ignition, black with yellow stripe, black with white stripe, white with black stripe, and plane white, does anybody know which is which as i need to hotwire an old sierra as the key is lost and i need to check if the motor still runs ok before i pull it out and swap it for mine cheers in advance |
|
| Author: | shep [ Tue Oct 12, 2010 5:59 am ] |
| Post subject: | Re: need help hot wiring |
just pull the back out of the ignition barrel and use a screwdriver.
|
|
| Author: | spuki [ Tue Oct 12, 2010 6:04 am ] |
| Post subject: | Re: need help hot wiring |
cheers shep, just took it out then, will hook a battery up to her tomoz and test it out |
|
| Author: | Ben_Sierra [ Tue Oct 12, 2010 6:06 am ] |
| Post subject: | Re: need help hot wiring |
I don't have a wiring diagram here but it would be fairly simple to work out. Strip back the wires and find out which one has 12V on it. Touch the 12V to each wire in turn. One will turn on the radio etc, this is ACC. One will turn on the ignition (dash lights will come on). This is IGN. One will turn the starter motor. This is START. Twist 12V up with IGN to to turn the ignition on, then touch START to them to turn the starter over until it starts... |
|
| Author: | Ben_Sierra [ Tue Oct 12, 2010 6:07 am ] |
| Post subject: | Re: need help hot wiring |
Or do what shep said... |
|
| Author: | spuki [ Tue Oct 12, 2010 6:09 am ] |
| Post subject: | Re: need help hot wiring |
haha yeah thanks for the info though ben |
|
| Author: | zooktastic [ Tue Oct 12, 2010 7:05 am ] |
| Post subject: | Re: need help hot wiring |
yellow and black should be the start cct i think |
|
| Author: | royce [ Tue Oct 12, 2010 7:13 am ] |
| Post subject: | Re: need help hot wiring |
this is from memory, likely to be wrong white is power in (battery) black yellow is start black white ign white black is acc bottom two could be the other way around too |
|
| Author: | Ben_Sierra [ Tue Oct 12, 2010 7:19 am ] |
| Post subject: | Re: need help hot wiring |
The onyl wiring diagram I could find was US spec and the colours were all different... |
|
| Author: | spuki [ Tue Oct 12, 2010 7:48 am ] |
| Post subject: | Re: need help hot wiring |
Ben_Sierra wrote: The onyl wiring diagram I could find was US spec and the colours were all different...
yeah same. cheers for all the help guys |
|
| Author: | steak_knife [ Tue Oct 12, 2010 10:11 am ] |
| Post subject: | Re: need help hot wiring |
royce wrote: this is from memory, likely to be wrong
white is power in (battery) black yellow is start black white ign white black is acc bottom two could be the other way around too Your memory is good.. 
|
|
| Author: | kenn [ Tue Oct 12, 2010 8:44 pm ] |
| Post subject: | Re: need help hot wiring |
You do have the owners permision ,yes..  
I mean you did ask how to Hot Wire a suzuki.. 
|
|
| Author: | spuki [ Tue Oct 12, 2010 8:57 pm ] |
| Post subject: | Re: need help hot wiring |
kenn wrote: You do have the owners permision ,yes..
I mean you did ask how to Hot Wire a suzuki.. haha yeah its my spares sierra ive got sitting round the back |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|