| auszookers.com https://auszookers.com/forum/ |
|
| Would this roll bar be any good https://auszookers.com/forum/viewtopic.php?f=5&t=15889 |
Page 1 of 1 |
| Author: | jake_ [ Wed Oct 13, 2010 8:52 am ] |
| Post subject: | Would this roll bar be any good |
My sierra came with a roll bar, the roll bar "mounts" are welded to the inside of the B pillar, kinda like hurdle bars in a ute. So you guys that know about this stuff, do you think it would be any good, i.e. save me if my zook rolled? |
|
| Author: | inbits [ Wed Oct 13, 2010 8:56 am ] |
| Post subject: | Re: Would this roll bar be any good |
That is not in any way a roll bar it looks more like a brace for something someone has fitted. |
|
| Author: | Rusho [ Wed Oct 13, 2010 8:57 am ] |
| Post subject: | Re: Would this roll bar be any good |
That would do 4/5th's of stuff all mate
|
|
| Author: | alien [ Wed Oct 13, 2010 9:02 am ] |
| Post subject: | Re: Would this roll bar be any good |
looks like it would hold a fishing rod or something with the roof off? also - wtf is with your seatbelt?! and no seatbelt stay behind the pillar either. |
|
| Author: | steak_knife [ Wed Oct 13, 2010 9:18 am ] |
| Post subject: | Re: Would this roll bar be any good |
| Author: | Rusho [ Wed Oct 13, 2010 9:21 am ] |
| Post subject: | Re: Would this roll bar be any good |
steak_knife wrote: 8O Tar.....
Its for strength stekky |
|
| Author: | Rhino [ Wed Oct 13, 2010 9:35 am ] |
| Post subject: | Re: Would this roll bar be any good |
jake_ wrote: My sierra came with a roll bar, the roll bar "mounts" are welded to the inside of the B pillar, kinda like hurdle bars in a ute. So you guys that know about this stuff, do you think it would be any good, i.e. save me if my zook rolled?
Got any pics of the rest of the roll bar??? |
|
| Author: | jake_ [ Sun Nov 07, 2010 8:24 am ] |
| Post subject: | Re: Would this roll bar be any good |
ok guys, here are some pics of the actual roll bar. So if this is no good does anybody sell new roll bars? Its lwb. Is the standard B pillar any good? Cheers |
|
| Author: | alien [ Sun Nov 07, 2010 8:32 am ] |
| Post subject: | Re: Would this roll bar be any good |
wow - thats craptacular... lol standard targa bar is pretty dam strong - saw a soft top sierra launch off a blackboy at 40km/hr (pass. side wheels drove up it) - the front leaf got a small bend in it, zuk got about 1m of air while sideways in the air and landed entirely on the A&B pillars (it was diagonally upside down) then slid and dropped flat on its side... the window surround was fine, targa bar only slightly bent, enough that a few kicks put it back into place and doors shut fine. |
|
| Author: | Fatzook [ Sun Nov 07, 2010 9:58 am ] |
| Post subject: | Re: Would this roll bar be any good |
I'm gonna air on the side of caution and say no. I would not rely on that bar to improve your chances of surviving a rollover. |
|
| Author: | Jccck [ Sun Nov 07, 2010 10:38 am ] |
| Post subject: | Re: Would this roll bar be any good |
alien wrote: wow - thats craptacular... lol
standard targa bar is pretty dam strong - saw a soft top sierra launch off a blackboy at 40km/hr (pass. side wheels drove up it) - the front leaf got a small bend in it, zuk got about 1m of air while sideways in the air and landed entirely on the A&B pillars (it was diagonally upside down) then slid and dropped flat on its side... the window surround was fine, targa bar only slightly bent, enough that a few kicks put it back into place and doors shut fine. That's a solid effort! What was he trying to do.. 2wheel stunt driving? And yes they're amazingly strong strong for what they are!.. Even the window surround is very strong.. Weak points in the roof are the upper door supports that go between the windscreen and B pillar |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|