auszookers.com
https://auszookers.com/forum/

snorkels
https://auszookers.com/forum/viewtopic.php?f=5&t=15928		 Page 1 of 1
Author:  samstaszuk [ Thu Oct 14, 2010 9:46 am ]
Post subject:  snorkels
Hey guys, whats everyones thought on snorkels?
What brands should i avoid or go for?
Author:  rpmwrx [ Thu Oct 14, 2010 9:52 am ]
Post subject:  Re: snorkels
Make one... Or get a good exhaust shop to fab you one up...
Author:  ck13488 [ Thu Oct 14, 2010 10:00 am ]
Post subject:  Re: snorkels
+1 for exhaust shop jobby...even mild steel then prime/paint it
Author:  samstaszuk [ Thu Oct 14, 2010 10:01 am ]
Post subject:  Re: snorkels
How easy are they to make up?
Author:  ck13488 [ Thu Oct 14, 2010 10:06 am ]
Post subject:  Re: snorkels
if your asking that question i would be getting an exhaust shop or mate with the required welding skills to do it
Author:  alien [ Thu Oct 14, 2010 10:10 am ]
Post subject:  Re: snorkels
90 degree bend from guard to outside, turn 90 degrees and make a 70 degree bend to follow up the window, then a 20 degree bend so the head sits upright... pretty easy - although i find the pipe snorkels to be hideous... just my opinion though =)
Author:  samstaszuk [ Thu Oct 14, 2010 10:14 am ]
Post subject:  Re: snorkels
so going for a store bought one isnt the option then?
Author:  alien [ Thu Oct 14, 2010 10:14 am ]
Post subject:  Re: snorkels
i think its your best and the best looking option - but its not the cheap one.
Author:  Rusho [ Thu Oct 14, 2010 10:17 am ]
Post subject:  Re: snorkels
If you don't like/can't weld you could always do mandrel bends with rubber slip joints :roll: :roll: This is my snorkel anyways, some ideas perhaps

Image
Image

It is 3 inch exhaust with mandrel bends(dont like the pipe benders at exhaust places :roll: ) powder coated. 90 degree bend from 3 inch down to 2 1/2 i think for the air box. Sorry about the picture quality, but you get the idea. I just wanted something different and follow the body lines. Airtec snork head to follow to finish it off. I didn't fabricate this either :P Compliments to Mr.Fat 8)
Author:  tombutt [ Thu Oct 14, 2010 10:39 am ]
Post subject:  Re: snorkels
you didnt need to tell everyone that rusho yours would be made of electrical conduit if you made it

ive got a bought one and wouldnt bother agin just get one made
Author:  tmb99 [ Thu Oct 14, 2010 12:09 pm ]
Post subject:  Re: snorkels
I've got an airflow one I no longer need. If your keen pm me for details.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/