| auszookers.com https://auszookers.com/forum/ |
|
| Earth leakage https://auszookers.com/forum/viewtopic.php?f=5&t=15973 |
Page 1 of 1 |
| Author: | mightymouse [ Sat Oct 16, 2010 11:03 pm ] |
| Post subject: | Earth leakage |
| Author: | SuziBlu [ Sat Oct 16, 2010 11:17 pm ] |
| Post subject: | Re: Earth leakage |
Sounds like the alternator is cactus, voltage regulator most probably. |
|
| Author: | mightymouse [ Sat Oct 16, 2010 11:39 pm ] |
| Post subject: | Re: Earth leakage |
I thought it may be but had it checked and it appears to be OK, but I will have it done again, by the way thanks for the answer. |
|
| Author: | SuziBlu [ Sat Oct 16, 2010 11:50 pm ] |
| Post subject: | Re: Earth leakage |
Itas a very easy check, if you have a multimeter, even a cheap one is a must have item in ya tool box. Set it to volts, check battery voltage, start motor, and see what happens, if its a good system, at around fast idle you should have 14 or so volts, mine maxs out at 14.7v by my meter, the battery is new, holds 13.1v. |
|
| Author: | mightymouse [ Sun Oct 17, 2010 12:19 am ] |
| Post subject: | Re: Earth leakage |
I have tested the unit with a multimeter that shows 13+volts that is why I thought all was ok, but still the jigger flattens batteries. |
|
| Author: | 89_tintop [ Sun Oct 17, 2010 12:40 am ] |
| Post subject: | Re: Earth leakage |
You want to test current draw from the battery. Using muktimeter set to amps. Disconnect earth lead on the battery and connect one lead,from the multimetre to the terminal on the battery and the other to the disconnected lead. Let me know on the reading An alternator can still charge and also drain the battery when not running.. |
|
| Author: | Damo [ Sun Oct 17, 2010 12:42 am ] |
| Post subject: | Re: Earth leakage |
Sounds to me like you have an accessory that is not turning off when your ignition is off. Have you got a butt-load of extra wires cabled to your +ve battery terminal? |
|
| Author: | mightymouse [ Sun Oct 17, 2010 2:09 am ] |
| Post subject: | Re: Earth leakage |
89-tintop the current draw a t negative terminal is very slight approx 2 amps but I do have an stand by radio fitted so the current draw I would think is not too radical. I do have a few fittings to the +ve eg: driving lights radio relay for radiator fan and the radiator fan. |
|
| Author: | matty87 [ Sun Oct 17, 2010 2:23 am ] |
| Post subject: | Re: Earth leakage |
mightymouse wrote: 89-tintop the current draw a t negative terminal is very slight approx 2 amps but I do have an stand by radio fitted so the current draw I would think is not too radical. I do have a few fittings to the +ve eg: driving lights radio relay for radiator fan and the radiator fan.
2 amps is huge if there is nothing on the strand by radio should not be drawing anything above milliamps. |
|
| Author: | 89_tintop [ Sun Oct 17, 2010 7:19 am ] |
| Post subject: | Re: Earth leakage |
2 amps is huge mate.. Would discharge a battery overnight. Disconnect some I'd accessories you have added lately while the multimetre is connected like I said before. eventually something that disconnect will drop the readout on ther multimetre to 0 or 0.02 it something like that is acceptable. One you get it to drop let me know what it drops to. |
|
| Author: | mightymouse [ Sun Oct 17, 2010 8:52 am ] |
| Post subject: | Re: Earth leakage |
|
|
| Author: | 89_tintop [ Sun Oct 17, 2010 9:01 am ] |
| Post subject: | Re: Earth leakage |
Once removed what did the multimetre readout drop to? Just curious.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|