| auszookers.com https://auszookers.com/forum/ |
|
| Sierra without Steering Dampener? https://auszookers.com/forum/viewtopic.php?f=5&t=16154 |
Page 1 of 1 |
| Author: | alien [ Sat Oct 23, 2010 2:40 am ] |
| Post subject: | Sierra without Steering Dampener? |
Hey all have had a recurring steering problem where it wouldnt return to center on cornering, but only the last 1/4 or so of a turn... front wheel bearings were a little loose, which helped but didnt remove the problem. I've since undone the steering dampener (stock one) and its driving way better now - no issues at all. The dampener is incredibly hard to compress but easy to open up so i'd say thats a fair sign its shagged. Which brings me to the question: do i really need the dampener? i hit a few kurbs in my testing and didnt notice any more kick-back from the wheel than normal? is there something im missing? lol |
|
| Author: | 89_tintop [ Sat Oct 23, 2010 2:44 am ] |
| Post subject: | Re: Sierra without Steering Damper? |
I ran my sierra without one for a while and really did not notice any difference. So IMO yup don't need to run one |
|
| Author: | Damo [ Sat Oct 23, 2010 2:49 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
Im running without one and every now and then you'll hit something that sets up an oscillation. Given the choice I would run one. |
|
| Author: | alien [ Sat Oct 23, 2010 2:53 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
yeah might order one monday and just run without till it arrives. tell you what though - running without makes the steering way lighter =P |
|
| Author: | Highway-Star [ Sat Oct 23, 2010 2:58 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
alien wrote: Hey all
have had a recurring steering problem where it wouldnt return to center on cornering, but only the last 1/4 or so of a turn... front wheel bearings were a little loose, which helped but didnt remove the problem. I've since undone the steering dampener (stock one) and its driving way better now - no issues at all. The dampener is incredibly hard to compress but easy to open up so i'd say thats a fair sign its shagged. Which brings me to the question: do i really need the dampener? i hit a few kurbs in my testing and didnt notice any more kick-back from the wheel than normal? is there something im missing? lol Not returning to centre is castor, I have castor wedges in my SJ and it self centres rather agressively... I like it IMO Steering damper should be there, its part of design of the front suspension and steering. |
|
| Author: | BlueSuzy [ Sat Oct 23, 2010 3:51 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
Coily's never had one. No brackets or anything. I dont run one either, but i have vit ps. |
|
| Author: | alien [ Sat Oct 23, 2010 4:09 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
highway-star - its returning to center awesomely now, enough so that if i let go of the wheel half way round a corner it straigtens up almost instantly and points me 45degrees straight off the road =P anyone bought a new standard one before? how easy are they to compress and expand? my busted one is about 2-3kg to expand and about 15-20kg to compress with a nice rubber squealing sound on compression (just guessing). just went for a long drive - 110km/hr and parking, reversing etc in carparks and its spot on now, handling feels so much better and i can feel the road much better through the wheel. I'm hoping a standard dampener wont rob me of that feel. |
|
| Author: | jonno_racing [ Sat Oct 23, 2010 4:10 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
BlueSuzy wrote: Coily's never had one. No brackets or anything.
I dont run one either, but i have vit ps. i run one, had the mount welded on.. stoped my head shake |
|
| Author: | zooky08 [ Sat Oct 23, 2010 5:06 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
I had a busted damper and it use to rip the steering wheel straight out of my hands when i hit shit. Neally come close to breaking my wrist a couplee of times. So i think it would be best to run one imo. I just ordered a stock (gabriel) damper. About $55. It fixed every thing |
|
| Author: | whincup [ Sat Oct 23, 2010 5:08 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
alien wrote: I'm hoping a standard dampener wont rob me of that feel.
i just had a new one put on and i noticed a HUGE difference, although i had the front wheel bearings replaced and one was completely shagged, so the difference could have been that. IMO you wont notice a difference on-road between it being there, but offroad i think it will make a noticeable difference... |
|
| Author: | steak_knife [ Sat Oct 23, 2010 5:34 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
http://www.lowrangeoffroad.com/suzuki/s ... -kits.html I want one O these.. Like Mr Blue I'm not running one, vit P/s, but I can feel the start of the wobble when I hit bump's, so going to get one O them.. |
|
| Author: | royce [ Sat Oct 23, 2010 5:39 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
steak_knife wrote: http://www.lowrangeoffroad.com/suzuki/samurai/steering/steering-stabilizer-kit-for-cross-over-steering-kits.html
I want one O these.. Like Mr Blue I'm not running one, vit P/s, but I can feel the start of the wobble when I hit bump's, so going to get one O them.. These are a good thing, dont fit NT though |
|
| Author: | steak_knife [ Sat Oct 23, 2010 5:41 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
| Author: | royce [ Sat Oct 23, 2010 5:42 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
by NT I mean NT diff, not wide enough |
|
| Author: | steak_knife [ Sat Oct 23, 2010 5:45 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
I got your meaning as soon as I clicked " Submit" |
|
| Author: | lump_a_charcoal [ Sat Oct 23, 2010 6:11 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
Aron, I ripped mine off a few years ago wheeling at zigzag - It was so good afterwards that I never refitted it. Unnecessary IMO if your steering is set up right. |
|
| Author: | Gwagensteve [ Sat Oct 23, 2010 7:13 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
X2. Don't bother replacing it IMHO. PS they have 50/50 valving - should be no harder to compress or expand. I've built a heap of cars without them. |
|
| Author: | alien [ Sat Oct 23, 2010 7:35 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
haha ok i'll leave it off until i have a chance to try it offroad... if i dont like it offroad ill chuck one back on, if i cant tell the difference i'll leave it off =) |
|
| Author: | ajsr [ Sat Oct 23, 2010 7:50 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
Mine doesnt run one |
|
| Author: | alex [ Sat Oct 23, 2010 10:11 am ] |
| Post subject: | Re: Sierra without Steering Dampener? |
ajsr wrote: Mine doesnt run one
x2 |
|
| Author: | Moph [ Sat Oct 23, 2010 12:28 pm ] |
| Post subject: | Re: Sierra without Steering Dampener? |
Mine has one there for looks ... its completely buggered and can be pushed in/out really quickly with little force. Doesn't seem to be a problem. Have held out on replacing it because all the aftermarket ones I've seen are RTC which I don't need, and haven't chased down an original. |
|
| Author: | alien [ Sat Oct 23, 2010 1:12 pm ] |
| Post subject: | Re: Sierra without Steering Dampener? |
suzistore do an original - looks like genuine, probably maruti: http://www.suzistore.com.au/shopexd.asp?id=844 not cheap though! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|