auszookers.com
https://auszookers.com/forum/

Bump Stop Options 90' Vitara SWB
https://auszookers.com/forum/viewtopic.php?f=5&t=16578		 Page 1 of 1
Author:  Microwire [ Mon Nov 08, 2010 7:06 am ]
Post subject:  Bump Stop Options 90' Vitara SWB
Hi Guys,

I've had a quick look on ebay and there seem to be a couple of universal bump stops. Since I won't be getting my lift until next year I want to get some bumpstop extensions just to help with the bigger wheels scrubbing.

Basically I'm stumped as to which ones to get below is a link to one I was thinking about, what do you think?

And do I just get some bolts and washers from bunnings or what?

http://cgi.ebay.com.au/UNIVERSAL-BUMP-S ... 45f55b04bc

Thanks in advance. :D
Author:  got_bar_work [ Mon Nov 08, 2010 7:14 am ]
Post subject:  Re: Bump Stop Options 90' Vitara SWB
if u can get hold of a welder there not hard to make extensions
just need to weld a bolt and nut on to to bits of plate then weld them on to a bit of pipe the length u need
or better option would be to weld a top on a pipe and weld it to the bottom spring seat
as the top method rubs on the springs
Author:  atari4x4 [ Mon Nov 08, 2010 7:47 am ]
Post subject:  Re: Bump Stop Options 90' Vitara SWB
http://auszookers.com/index.php?name=Fo ... ump#109858

XL-7 front bumpstop extensions ARB part #FK28, most ARB stores have no idea ARB/OME make it.
Author:  Microwire [ Mon Nov 08, 2010 8:53 am ]
Post subject:  Re: Bump Stop Options 90' Vitara SWB
Sweet Thanks for the tips guys. I've got a welder didn't even think of something like that, I might try a removable one.

Thanks for the Link Atari, I tried for a min to search but no luck.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/